User manual TP-LINK TL-SG1016

[. . . ] Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO. , LTD. Copyright © 2007 TP-LINK TECHNOLOGIES CO. , LTD. [. . . ] 7 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Appendix A: Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Appendix B: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide Package Contents The following contents should be found in your box: One Gigabit Ethernet Switch One power cord This User's Guide Rubber footpads for Desk-mount Rack-mount kit for installing the switch in a 19-inch rack Note: If any of the above contents is damaged or missing, please contact the retailer from whom you purchased the Gigabit Ethernet Switch for assistance. 1 TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide Chapter 1 Introduction of the Product This chapter describes the features of the Gigabit Ethernet Switch. 1. 1 Overview of the Product The Gigabit Ethernet Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to boost your old network to 1000Mbps. Increase the speed of your network server and backbone connections make Gigabit a reality. Power users in the home, office, workgroup or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files and other applications that have to move large files across the network almost instantly. The Gigabit Ethernet Switch features a non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput. It is compatible with all 10, 100, and 1000Mbps Ethernet devices because it is standard-based, it protects your existing network investments while providing you with a straightforward migration path to faster Gigabit speeds. The Gigabit Ethernet Switch is plug-and-play and no configuration is required. Auto MDI/MDI-X cable detection on all ports eliminate the need for crossover cable or Uplink port. Each port can be used as general ports or Uplink ports, and any port can be simply plugged into a server, a hub, a router or a switch, using the straight cable or crossover cable. Diagnostic LEDs which display link status and activity, allowing you to quickly detect and correct problems on the network. 1. 2 Features Complies with IEEE802. 3, IEEE802. 3u, IEEE802. 3ab standards 2 TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide 8/16/24/48 10/100/1000Mbps Auto-Negotiation RJ45 ports supporting Auto- MDI/MDIX All ports Support full/half-duplex mode for 10/100Mbps and full duplex- mode for 1000Mbps Supports IEEE802. 3x flow control for full-duplex mode and backpressure for half-duplex mode Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput 4K entry MAC address table of the TL-SG1008 and 8K entry MAC address table of the TL-SG1016, TL-SG1024 and TL-SG1048 with auto-learning and auto-aging LED indicators for monitoring power, link, speed and activity Store-and-Forward switching method 3 TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide Chapter 2 2. 1 Installation Mounting the Switch on a Desk Before placing the Switch on a desk, attach four rubber footpads to the flutes on the Switch bottom, then lay the Switch on the desktop, where can be able to withstand 5kg of weight. TL-SG1008, TL-SG1016, TL-SG1024 and TL-SG1048 are different in the number of LED indicators and RJ45 ports. All figures are of TL-SG1008 in this user's guide. Note Make sure there is a grounded AC outlet within 1. 5 meters, and working well. Make sure there is free space for radiating heat and air. Make sure not too place anything to heavy on top of the switch. 2. 2 Mounting the Switch in a Rack The dimension of the Gigabit Ethernet Switch is designed according to the standard 19" rack-mountable steel case of Electronic Industries Association. [. . . ] 10/100Mbps Link/Act LED: This indicator will light solid green when the corresponding port is connected to a 10/100Mbps device and will flash green when data is being transmitted or received on the working connection. 8 TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide Appendix A: Specifications General IEEE802. 3 10Base-T Standards IEEE802. 3u 100Base-TX IEEE802. 3ab 1000Base-T Topology Protocol Star CSMA/CD Ethernet: 10Mbps (Half Duplex), 20Mbps (Full Duplex) Fast Ethernet: 100Mbps (Half Duplex), 200Mbps (Full Data Transfer Rate Duplex) Gigabit Ethernet: 2000Mbps (Full Duplex) 10Base-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ù STP (maximum 100m) Network Media(Cable) 100Base-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ù STP (maximum 100m) 1000Base-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ù STP (maximum 100m) Number of Ports LED indicators Transfer Method MAC Address Learning 8/16/24/48 10/100/1000Mbps Auto-Negotiation RJ45 ports Power, 1000Mbps Link/Act, 10/100Mbps Link/Act Store-and-Forward Automatically learning, automatically aging 10Base-T: 14880pps/Port Frame Filter Rate 100Base-Tx: 148800pps/Port 1000Base-T: 1488000pps/Port 10Base-T: 14880pps/Port Frame Forward Rate 100Base-Tx: 148800pps/Port 1000Base-T: 1488000pps/Port 9 TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048 Gigabit Ethernet Switch User Guide Appendix B: Troubleshooting 1. The Power LED is not lit Make sure the AC power cord connected the Switch with power source properly. The Link/Act LED is not lit when a device is connected to the corresponding port Make sure that the cable connectors are firmly plugged into the Switch and the device. [. . . ]