User manual TP-LINK TL-WN722NC

[. . . ] http://www. tp-link. com is a registered trademark of TP-LINK TECHNOLOGIES CO. , LTD. Other brands and product names are trademarks or FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] To update this page and to show the current attached devices, click the Refresh button. 4. 7. 3 Address Reservation Choose menu "DHCP Address Reservation", you can view and add a reserved address for clients via the next screen (shown in Figure 4-27). When you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to the servers that require permanent IP settings. Figure 4-27 Address Reservation MAC Address - The MAC address of the PC for which you want to reserve an IP address. Reserved IP Address - The IP address reserved for the PC by the Router. Status - The status of this entry, either Enabled or Disabled. Enter the MAC address (in XX-XX-XX-XX-XX-XX format. ) and IP address (in dotted-decimal notation) of the computer for which you want to reserve an IP address. Click the Save button. - 49 - TL-WR1043N/TL-WN722NC Figure 4-28 Wireless N Gigabit Router Add or Modify an Address Reservation Entry To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. Click the Save button. Click the Enable/Disabled All button to make all entries enabled/disabled Click the Delete All button to delete all entries. Click the Next button to go to the next page and Click the Previous button to return the previous page. 4. 8 Network Sharing Figure 4-29 The Network Sharing menu There are two submenus under the Network Sharing menu (shown in Figure 4-29), Sharing Service and User Accounts. Click any of them, and you will be able to configure the corresponding function. 4. 8. 1 Sharing Service Choose menu "Network SharingSharing Service", you can configure a USB disk drive attached to the Router on this page as shown in Figure 4-30. Figure 4-30 Network Sharing Service Status - Indicates the Network Sharing service's current status. To unplug the USB drive, click Eject Disk button first. Simply pulling USB drive out of the USB port can cause damage to the device and loss of data. Mounted volumes are subject to the 8-volume limit. So you cannot access more than 8 volumes on the USB storage device. NTFS is the recommended file system for Network Sharing because it supports several features that the other file systems do not, such as large files and large volume support. 4. 8. 2 User Accounts You can specify the user name and password for Network Sharing users on the following User Accounts page. Network Sharing users can use Internet Explorer to access files on the USB drive. There are two Network Sharing users that can access the shares. Administrator has read/write access while Guest has read-only access. Only Administrator can use a Web browser to transfer the files from a PC to the Writable shared volume on the USB drive. Figure 4-32 User Accounts User Name - Type the user name that you want to give access to the USB drive. The user name must be composed of alphanumeric symbols not exceeding 15 characters in length. Password - Enter the password in the Password field. [. . . ] Setting IP address manually 1 2 Select Use the following IP address radio button. And the following items available If the Router's LAN IP address is 192. 168. 1. 1, specify the IP address as 192. 168. 1. x (x is from 2 to 254), and the Subnet mask as 255. 255. 255. 0. 3 Type the Router's LAN IP address (the default IP is 192. 168. 1. 1) into the Default gateway field. 4 Select Use the following DNS server addresses. [. . . ]