User manual TP-LINK TL-WR340GD

[. . . ] TL-WR340G/TL-WR340GD 54M Wireless Router Rev1. 0. 0 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO. , LTD. Copyright © 2007 TP-LINK TECHNOLOGIES CO. , LTD. [. . . ] The DHCP Server can be configured on the page (shown in Figure 3-23): 30 TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-23 DHCP Settings DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must manually configure the computer. Start IP Address - This field specifies the first of the addresses in the IP address pool. 192. 168. 1. 100 is the default start address. End IP Address - This field specifies the last of the addresses in the IP address pool. 192. 168. 1. 199 is the default end address. Address Lease Time - The Address Lease Time is the amount of time in which a network user will be allowed connection to the router with their current dynamic IP Address. The user will be "leased" this dynamic IP Address. The range of the time is 1 ~ 2880 minutes. Default Gateway - (Optional. ) Suggest to input the IP address of the LAN port of the router, default value is 192. 168. 1. 1 Default Domain - (Optional. ) Input the domain name of your network. Primary DNS - (Optional. ) Input the DNS IP address provided by your ISP. Secondary DNS - (Optional. ) Input the IP address of another DNS server if your ISP provides two DNS servers. Note: To use the DHCP server function of the router, you must configure all computers on the LAN as "Obtain an IP Address automatically" mode. This function will take effect until the router reboots. 3. 6. 2 DHCP Clients List This page shows Client Name, MAC Address, Assigned IP, and Lease Time for each DHCP Client attached to the router (Figure 3-24): 31 TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-24 DHCP Clients List Index - The index of the DHCP Client Client Name - The name of the DHCP client MAC Address - The MAC address of the DHCP client Assigned IP - The IP address that the router has allocated to the DHCP client. Lease Time - The time of the DHCP client leased. Before the time is up, DHCP client will request to renew the lease automatically. You cannot change any of the values on this page. To update this page and to show the current attached devices, click on the Refresh button. 3. 6. 3 Address Reservation When you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to servers that require permanent IP settings. This page is used for address reservation (shown in Figure 3-25). Figure 3-25 Address Reservation MAC Address - The MAC address of the PC of which you want to reserve IP address. Assigned IP Address - The IP address of the router reserved. Status - The status of this entry either Enabled or Disabled. [. . . ] Otherwise, you can select "Auto-connecting" for Internet connection mode. PPPoE Connection Mode Note: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications is visiting the Internet continually in the background. If you are a Cable user, please configure the router following the above steps. How do I configure the router to access Internet by Ethernet users?1) Login to the router, click the "Network" menu on the left of your browser, and click "WAN" submenu. [. . . ]