User manual TRANSCEND TS-RD13B

[. . . ] 9 Mac OS X Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Linux Kernel 2. 4 or Later, Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Safely Remove the Multi-Card Reader Remove the Reader in Windows 98/98SE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Remove the Reader in Windows 2000, Me, or XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To prevent data corruption only one of the cards may be used in an input slot at a time. Windows® 98/98SE and 2000 Setup 1. Connect the Multi-Card Reader to an available USB port directly using the supplied cable. Your computer automatically recognizes the Multi-Card Reader and displays a "New Hardware Found" message. Windows will install the files needed to use your device. 4. Four Removable Disk drives with Card Slot Identification Icons will appear in My Computer. The Multi-Card Reader is now ready for use. 5 v To safely remove a memory card, select the appropriate Card Slot ID and right click on the icon to display the quick settings list. Click "Eject" and then pull out the memory card. Make sure that the LED is not blinking (no data is being transferred) before you remove the card. WARNING: Never remove or insert a memory card or disconnect the USB cable while data is being transferred. In order to avoid data transfer errors due to improper shutdown of a connected device, you should always open the transferred file in its new location to ensure successful transfer before disconnecting the Reader. 6 Windows® Me and XP Setup Transcend's Multi-Card Reader does not require a device driver for Windows Me, or Windows XP. You may connect the device directly using the supplied cable to an available USB port on your computer and Windows Me, or Windows XP will automatically detect it. The below screen shots illustrate the process: Four Removable Disk drives with newly assigned drive letters appear in My Computer. The Multi-Card Reader is now ready for use. 7 v To display the Card Slot Identification Icons, please install the driver. v To safely remove a memory card, select the appropriate Card Slot ID and right click on the icon to display the quick settings list. Click "Eject" and then pull out the memory card. Make sure that the LED is not blinking (no data is being transferred) before you remove the card. WARNING: Never remove or insert a memory card or disconnect the USB cable while data is being transferred. In order to avoid data transfer errors due to improper shutdown of a connected device, you should always open the transferred file in its new location to ensure successful transfer before disconnecting the Reader. 8 MacTM OS 9. x Setup 1. Connect the Multi-Card Reader to an available USB port directly using the supplied cable. Insert a memory card into the Multi-Card Reader. You can then use the memory card as if it were a Hard Disk on your Mac. v To safely remove a memory card, drag and drop the corresponding disk icon onto the trashcan icon. After the disk icon disappears, you may remove the memory card. WARNING: Never remove or insert a memory card or disconnect the USB cable while data is being transferred. In order to avoid data transfer errors due to improper shutdown of a connected device, you should always open the transferred file in its new location to ensure successful transfer before disconnecting the Reader. Mac OS X Setup Transcend's Multi-Card Reader does not require a device driver for the Mac OS X operating system. [. . . ] Transcend will not be liable for damages resulting from a third party device that causes the Transcend product to fail. Transcend shall in no event be liable for any consequential, indirect, or incidental damages, lost profits, lost business investments, lost goodwill, or interference with business relationships as a result of lost data. Transcend is also not responsible for damage or failure of any third party equipment, even if Transcend has been advised of the possibility. This limitation does not apply to the extent that it is illegal or unenforceable under applicable law. [. . . ]