User manual TRANSCEND TS0MFLRD8B

[. . . ] do not restart your computer at this time. option and select the Finish button. Please Cancel the Yes, restart my computer now 3 6. Shutdown the computer and refer to the Hardware Setup below to set up the Internal Multi-Card Reader. Driver Installation for Windows Me, XP and Linux No driver is needed. Turn off the computer and refer to Hardware Setup below to install the Internal Multi-Card Reader into your PC. Hardware Setup 1. [. . . ] Four Removable Disk drives with newly assigned drive letters will appear in My Computer. The Internal Multi-Card Reader is ready for use. To Use with Windows Me and XP 1. The Found New Hardware status message will appear (the first time you power on the computer after installing the Internal Multi-Card Reader). Four Removable Disk drives with newly assigned drive letters will appear in My Computer. The Internal Multi-Card Reader is ready for use. To Use with Linux Kernel 2. 4 or Later The Internal Multi-Card Reader is a driver-free device for Linux kernel 2. 4 or later. Power on the computer and insert a memory card into the Internal Multi-Card Reader. 2. Create a directory for the Internal Multi-Card Reader. 7 Example: mkdir /mnt/CardReader 3. Mount the Internal Multi-Card Reader. Example: mount ­a ­t msdos /dev/sda1 /mnt/CardReader No matter how many memory cards are inserted into the Internal Multi-Card Reader, only the memory card that was first inserted can be mounted. To Safely Remove Memory Cards To Remove in Windows Make sure that the LED is not blinking (no data is being transmitted). You can then safely remove Removal of a memory card while data is transferring may cause damage to the card and the system to halt. To Remove in Linux Unmount the device from the Linux environment. Example: umount /mnt/CardReader You can then safely remove the memory card. Never remove or insert a memory card while data is being transmitted. completed. To avoid improper shutdown, open the transmitted file from its new location to ensure transmission has been 8 Specifications Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC 5V from USB port Slots for Storage Media:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CompactFlash Card Type I/II Microdrive SmartMedia Card Secure Digital Card miniSD (with adapter) MultiMediaCard RS-MMC (with adapter) Memory Stick Memory Stick PRO Memory Stick Duo (with adapter) Memory Stick PRO Duo (with adapter) Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C­40°C Storage Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -10°C­60°C Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0%­90% RH Emission/Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FCC Class B, CE, BSMI Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102mm x 102mm x 26mm Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234 g 9 Card Reader Limited Warranty "Above and beyond" is the standard we set ourselves for customer service at Transcend. [. . . ] Transcend will not be liable for damages resulting from a third party device that causes the Transcend product to fail. Transcend shall in no event be liable for any consequential, indirect, or incidental damages, lost profits, lost business investments, lost goodwill, or interference with business relationships as a result of lost data. Transcend is also not responsible for damage or failure of any third party equipment, even if Transcend has been advised of the possibility. This limitation does not apply to the extent that it is illegal or unenforceable under applicable law. [. . . ]