User manual TRANSCEND TS256MSD45 QUICK INSTRUCTION GUIDE

[. . . ] 1 1 2 2 Driver Installation Driver Installation for Windows 98SE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Driver Installation for Windows Me, 2000, and XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Driver Installation for Mac OS 9. 0 or Later. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Driver Installation for Linux Kernel 2. 4 or Later . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The Repeat LED twice. To resume normal playback, press the Track Control Wheel 9 Repeat All Tracks Press the Track Control Wheel when the Repeat LED is on, or press the Track Control Wheel twice when the Repeat LED is off. To resume normal playback, press the Track Control Wheel again. Repeat a Portion of One Track (AB Repeat) 1. Press the Volume Control Wheel to mark the beginning of the portion you wish to repeat. Press the Volume Control Wheel again to mark the end of the portion you wish to repeat. The Repeat LED blinks orange at a slow speed, and the marked portion is played as a continuous loop. Hold When the HOLD switch is set to the "ON" position, all the buttons and control wheels are disabled. To enable the buttons and control wheels, the HOLD switch must be set to "OFF". switch is set to "ON", all LEDs will blink twice when you power on MP3 Function To Download or Upload MP3/WMA files 1. Plug JetFlash into an available USB port. A new Removable Disk drive with a newly assigned drive letter appears in the My Computer window. You can now download or upload MP3/WMA files from or to your computer by clicking and dragging the file names/icons to the desired directories. In order to be able to play MP3 or WMA files, you must store them in the root directory of JetFlash. button, then plug JetFlash into an available 13 Do not release the PLAY/PAUSE completed. 4. button until the Recovery procedures are Found New Hardware and New Hardware Found messages appear. (Only the first time you recover the JetFlash. ) 5. Click the Recovery button on the JetFlash splash screen. 6. MSCN Format status bar message appears. If above message does not appear, click the Recovery button on the JetFlash splash 14 button to screen again. If this still doesn't work, press and hold PLAY/PAUSE re-plug JetFlash first. Then, click the Recovery button on the JetFlash splash screen again. (Only the first time you run the Recovery program. ) 8. Click the Recovery button on the JetFlash windows splash screen again. 9. MSCN Format dialog box appears. Make sure that the Quick format checkbox 15 remains unchecked. Click Start to initiate the low-level format. 10. Click Close to complete the Recovery procedures. 11. Release the PLAY/PAUSE status for your usage. button. JetFlash has been returned to its initial 16 To Recover JetFlash in Windows Me, 2000, and XP Skip steps 1-3 if the Utility program has already been installed. [. . . ] 24 Q12: Q13: Why does JetFlash turn off automatically after entering MP3 mode or Record mode?A13: JetFlash features a power-save function. If your JetFlash is idle for two minutes, power-save is triggered and the power turns off automatically. Why is JetFlash automatically removed from the operating system when I use it as a USB Flash Drive? [. . . ]