User manual TRANSCEND TS2GJF2A

[. . . ] It's a highly integrated with flash memory, and is accessed via a dedicated serial interface optimized for fast and reliable data transmission. [. . . ] 30 tCLS1 tCLH1 tCS1 tCH1 tALS1 tALH1 tWP1 tDS1 tDH1 15 40 90 90 75 45 90 30 Unit ns ns ns ns ns ns ns ns ns Rev 1. 1 MultiMediaCard Notes CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF Transcend Information Inc. 6 TS128~2GMMC · Address Latch Cycle Parameter CLE Setup Time CE Setup Time ALE Setup Time ALE Hold Time Write Cycle Time WE Pulse Width WE High Hold Time Data Setup Time Data Hold Time Symbol tCLS2 tCS2 tALS2 tALH2 tWC2 tWP2 tWH2 tDS2 tDH2 Min. 90 195 30 15 150 45 105 90 30 Unit ns ns ns ns ns ns ns ns ns Rev 1. 1 MultiMediaCard Remark CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF Transcend Information Inc. 7 TS128~2GMMC Rev 1. 1 MultiMediaCard · Input Data Latch Cycle Parameter CLE Hold Time CE Hold Time ALE Setup Time Write Cycle Time WE Pulse Width WE High Hold Time Data Setup Time Data Hold Time Symbol tCLH3 tCH3 tALS3 tWC3 tWP3 tWH3 tDS3 tDH3 Min. 285 195 90 60 45 15 30 30 Unit ns ns ns ns ns ns ns ns Remark CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF Transcend Information Inc. 8 TS128~2GMMC · Serial Access Cycle after Read Parameter CE Access Time Read Cycle Time RE Pulse Width RE High Hold Time Data Setup Time Data Hold Time Ready to RE Low Symbol tCEA4 tRC4 tRP4 tREH4 tDS4 tDH4 tRR4 Min. MIL STD Method 1009 ESD protection Contact Pads: +/-4kV, Human body model according to ANSI EOS/ESD-S5. 1-1998 Non Contact Pads area: +/-8kV(coupling plane discharge) +/-15kV(air discharge) Human body model according to IEC61000-4-2 Durability Drop test Visual inspection Shape and form 10. 000 mating cycles; test procedure: t. b. d. 1. 5m free fall No warp page; no mold skin; complete form; no cavities surface smoothness sigma -0. 1 mm/cm² within contour; no cracks; no pollution (fat, oil dust, etc. ) Above technical information is based on MMC3. 3 standard specification and tested to be reliable, but SPI mode would not be supported. Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. [. . . ] Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. [. . . ]