User manual TRANSCEND TS40GSJ18

[. . . ] 7 Connecting to a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Disconnecting from a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Removing the StoreJetTM 1. 8 in Windows® 2000, XP and VISTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Removing the StoreJetTM 1. 8 in MacTM OS 9. 0, or Later. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Avoid squeezing your StoreJetTM 1. 8 to prevent damage to the internal HDD. Avoid placing objects onto your StoreJetTM 1. 8 to prevent damaging it. The StoreJetTM 1. 8 is powered directly via the USB port, no external power, or battery is required. Please use the Mini USB to USB A-Type cable that came with the StoreJetTM 1. 8 to connect it to a computer and always ensure that the cable you are using is in a good state of repair, NEVER use a cable that is frayed or damaged. · · · Before you connect your StoreJetTM 1. 8 to the USB port of a desktop, or notebook computer, please check the port is capable of supplying the 5V DC that the StoreJetTM 1. 8 requires to operate. · Ensure nothing is resting on the USB cable and that the cable is not located where it can be tripped over or stepped on. 5 Driver Installation Driver Installation for Windows® 2000, XP and VISTA No drivers are required. These Windows operating systems have built-in drivers to support the StoreJetTM 1. 8. Simply connect the StoreJetTM 1. 8 to the computer using an available USB port and Windows will install the necessary files. A new Removable Disk drive with a newly assigned drive letter will appear in the My Computer window. Driver Installation for MacTM OS 9. 0, or Later No drivers are required. Plug your StoreJetTM 1. 8 into an available USB port and your computer will automatically detect it. Driver Installation for LinuxTM Kernel 2. 4, or Later No drivers are required. Plug your StoreJetTM 1. 8 into a USB port and mount it. 1. First create a directory for the StoreJetTM 1. 8. Example: mkdir /mnt/Storejet 2. Then, mount the StoreJetTM 1. 8. Example: mount ­a ­t msdos /dev/sda1 /mnt/Storejet 6 Basic Operation Connecting to a Computer If you want to use the StoreJetTM 1. 8 as an External Hard Disk Drive to upload/download data to, or from your computer you will need to connect it to a USB port on the computer using the provided Mini USB to USB A-Type cable. Figure 1. Mini USB to USB A-Type Cable Figure 2. Connect the Mini USB end-connector of the cable to the Mini USB port on the StoreJetTM 1. 8. Connect the normal USB A-Type end-connector of the cable to an available USB port on the computer. When the StoreJetTM 1. 8 is successfully connected to the computer the StoreJetTM's Power LED will turn on and a new Removable Disk drive with a newly assigned drive letter will appear in the My Computer window. The StoreJetTM 1. 8's internal hard drive comes formatted for NTFS. At this stage the StoreJetTM 1. 8 is a Peripheral device and is charged via the computer's USB port. You can use the StoreJetTM 1. 8 as an external hard drive in conjunction with your computer to upload/download data. You can download data to the StoreJetTM 1. 8 simply by dragging and dropping files, or folders onto the Removable Disk drive that corresponds to the StoreJetTM 1. 8. Please be aware that if you are using the StoreJetTM 1. 8 with a notebook computer it is better to run the notebook off AC power. The reason for this is that the notebook's battery power will run down more quickly because the StoreJetTM 1. 8 needs to draw power from the USB port. 7 Disconnecting from a Computer Removing the StoreJetTM 1. 8 in Windows® 2000, XP and VISTA 1. Select the icon on the system tray. 2. [. . . ] If you want to backup a Mac computer you will need to format the drive for HFS+ using the Mac Disk Utility. Cannot detect the StoreJetTM 1. 8 in Linux The StoreJetTM 1. 8's internal hard drive comes formatted for NTFS. Linux CANNOT support the NTFS file system, please reformat the hard drive to the FAT file system. 10 Specifications · · · · · · · · · Size: Weight: Storage Media: Power Supply: Max Transfer Speeds: Operating Temperature: Storage Temperature: Humidity: Certificates: 95 mm × 71. 5 mm × 15 mm 130g 1. 8" Hard Disk Drive 5V DC supplied from the USB port 480Mbits (60MB) per second 5°C to 60°C -40°C to 70°C 8% to 90% RH CE, FCC Class B, BSMI Ordering Information Product Type StoreJetTM 1. 8 60GB Transcend P/N TS60GSJ18 11 Transcend Limited Warranty "Above and Beyond" is the standard we set ourselves for customer service at Transcend. This limitation does not apply to the extent that it is illegal or unenforceable under applicable law. DisclaimerThe foregoing limited warranty is exclusive. [. . . ]