User manual TRANSCEND TS4GUSDHC6-2 DATASHEET

[. . . ] The given minimum frequency range is for cases were continues clock is required Transcend Information Inc. 7 microSDHC Card series · Bus Timing (High Speed Mode) Ver1. 0 High Capacity microSD Card Parameter Clock frequency Data Transfer Mode Clock low time Clock high time Clock rise time Clock fall time Inputs CMD, DAT (referenced to CLK) Input set-up time Input hold time Outputs CMD, DAT (referenced to CLK) Symbol fPP tWL tWH tTLH tTHL tISU tIH Min 0 7 7 Max. 50 Unit MHz ns ns Remark CCARD 10 pF, (1 card) CCARD 10 pF, (1 card) CCARD 10 pF, (1 card) CCARD 10 pF, (1 card) CCARD 10 pF, (1 card) CCARD 10 pF, (1 card) CCARD 10 pF, (1 card) Clock CLK (All values are referred to min (VIH) and max (VIL) 3 3 6 2 ns ns ns ns Transcend Information Inc. 8 microSDHC Card series Output Delay time during Data Transfer Mode Output Hold time tODLY tOH 2. 5 40 14 Ver1. 0 High Capacity microSD Card ns ns pF CL 40 pF, (1 card) CL 40 pF, (1 card) (1 card) Total System capacitance for each line1 CL 1) In order to satisfy severe timing, host shall drive only one card. Transcend Information Inc. 9 microSDHC Card series Reliability and Durability Temperature Operation: -25° / 85° C C Storage: -40° (168h) / 85° (500h) C C Junction temperature: max. 95° C Moisture and corrosion Operation: 25° / 95% rel. humidity C Ver1. 0 High Capacity microSD Card Storage: 40° / 93% rel. hum. /500h C Salt Water Spray: 3% NaCl/35C; 24h acc. [. . . ] The structure of the CID register is defined in the following paragraphs: · MID An 8-bit binary number that identifies the card manufacturer. The MID number is controlled, defined, and allocated to a SD Memory Card manufacturer by the SD-3C, LLC. This procedure is established to ensure uniqueness of the CID register. · OID A 2-character ASCII string that identifies the card OEM and/or the card contents (when used as a distribution media either on ROM or FLASH cards). The OID number is controlled, defined, and allocated to a SD Memory Card manufacturer by the SD-3C, LLC. This procedure is established to ensure uniqueness of the CID register. Note: SD-3C, LLC licenses companies that wish to manufacture and/or sell SD Memory Cards, including but not limited to flash memory, ROM, OTP, RAM, and SDIO Combo Cards. SD-3C, LLC is a limited liability company established by Matsushita Electric Industrial Co. Ltd. , SanDisk Corporation and Toshiba Corporation. · PNM The product name is a string, 5 ASCII characters long. · PRV The product revision is composed of two Binary Coded Decimal (BCD) digits, four bits each, representing an "n. m" Transcend Information Inc. 12 microSDHC Card series Ver1. 0 High Capacity microSD Card revision number. The "n" is the most significant nibble and "m" is the least significant nibble. As an example, the PRV binary value field for product revision "6. 2" will be: 0110 0010 · PSN The Serial Number is 32 bits of binary number. · MDT The manufacturing date composed of two hexadecimal digits, one is 8 bit representing the year(y) and the other is four bits representing the month(m). The "m" field [11:8] is the month code. The "y" field [19:12] is the year code. As an example, the binary value of the Date field for production date "April 2001" will be: 00000001 0100. · CRC CRC7 checksum (7 bits). 3. CSD Register The following sections describe the CSD fields and the relevant data types for the High Capacity SD Memory Card. CSD Version 2. 0 is applied to only the High Capacity SD Memory Card. The field name in parenthesis is set to fixed value and indicates that the host is not necessary to refer these fields. The fixed values enables host, which refers to these fields, to keep compatibility to CSD Version 1. 0. The Cell Type field is coded as follows: R = readable, W(1) = writable once, W = multiple writable. Transcend Information Inc. 13 microSDHC Card series Ver1. 0 High Capacity microSD Card The CSD Register Fields (CSD Version 2. 0) The following sections describe the CSD fields and the relevant data types. If not explicitly defined otherwise, all bit strings are interpreted as binary coded numbers starting with the left bit first. · CSD_STRUCTURE Field structures of the CSD register are different depend on the Physical Specification Version and Card Capacity. If set, a driver stage register (DSR)must be implemented also. Transcend Information Inc. 16 microSDHC Card series Ver1. 0 High Capacity microSD Card · C_SIZE This field is expanded to 22 bits and can indicate up to 2 TBytes (It is the same as the maximum memory space specified by a 32-bit block address. ) This parameter is used to calculate the user data area capacity in the SD memory card (not include the protected area). The user data area capacity is calculated from C_SIZE as follows: memory capacity = (C_SIZE+1) * 512K byte As the maximum capacity of the Physical Layer Specification Version 2. 00 is 32 GB, the upper 6 bits of this field shall be set to 0. · ERASE_BLK_EN This field is fixed to 1, which means the host can erase one or multiple units of 512 bytes. · SECTOR_SIZE This field is fixed to 7Fh, which indicates 64 KBytes. [. . . ] The default value of the DSR register is Transcend Information Inc. 19 microSDHC Card series 0x404. Ver1. 0 High Capacity microSD Card 6. SCR Register In addition to the CSD register there is another configuration register that named - SD CARD Configuration Register (SCR). SCR provides information on SD Memory Card's special features that were configured into the given card. This register shall be set in the factory by the SD Memory Card manufacturer. [. . . ]