User manual TRAYNOR 100KB

[. . . ] When using electric products, basic precautions should always be followed, including the following: Your unit should be connected to a power source only of the voltage specified in the owners manual or as marked on the unit. Do not use with an extension cord or receptacle unless the plug can be fully inserted. Precautions should be taken so that the grounding scheme on the unit is not defeated. Do not place this product on an unstable cart, stand, tripod, bracket or table. [. . . ] This channel offers more gain than Channel 2, it's advised that the source with the lower level output be connected to Channel 1. Adjust the volume control for the level of sound desired. The phone jack can also use regular, unbalanced, cables. For best results, and reduced noise, it is advised that you use balanced (stereo) cables for interconnection wherever possible. â· Do Not use both the phone and XLR inputs on Channel 2 at the same time. Piano Contour: By activating the Piano Coutour on Channel 1, the 100kb Power Combo mixer/amp becomes attuned to helping you unleash that `killer' piano sound your keyboard is attempting to reproduce. Channel 2 - This channel is optimized for line level signals such as an electronic keyboard, CD-players, cassette decks, or other audio sources. The channel also sums stereo signals properly for use with this single amplifier system. You can utilize this feature by using the two RCA jacks (both sets of jacks can be used at the same time). Adjust the Channel 2 volume control for the level of sound desired. reverb: This switch enables the Reverb for Channel 2. This allows you to use the Internal Reverb selectively. This channel is also optimized for line level signals. The phone jack input is balanced (TRS or Tip/Ring/Sleeve, +/-/gnd), however, it can also accept regular unbalanced cables. Adjust the volume on the Channel 3 control for the level of sound desired. The tone controls affect the sound output from both channels. increase or decrease the LOW control to affect low frequency information and the HIGH control for high frequency information. Please note: Due to the great variance between possible signal sources, it may be possible to distort the signal by adjusting the LOW or HIGH controls. The EFFECTS LOOP can be used to insert signals from external sources such as a Digital Effects or Equalizers into the signal path. Connect the output of the equalizer or effects unit to the EFX RTN jack to complete the loop. [. . . ] Unlimited Warranty Yorkville's two and ten-year unlimited warranty on this product is transferable and does not require registration with Yorkville Sound or your dealer. If this product should fail for any reason within two years of the original purchase date (ten years for the wooden enclosure), simply return it to your Yorkville dealer with original proof of purchase and it will be repaired free of charge. This includes all Yorkville products, except for the YSM Series studio monitors, Coliseum Mini Series and TX Series Loudspeakers. Freight charges, consequential damages, weather damage, damage as a result of improper installation, damages due to exposure to extreme humidity, accident or natural disaster are excluded under the terms of this warranty. [. . . ]