User manual TRAYNOR 50KW

[. . . ] Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious personal injury and serious damage to the product. Use only with cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Follow the manufacturer's instructions when installing the product and use mounting accessories recommended by the manufacturer. [. . . ] To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. The mains plug of the power supply cord shall remain readily operable. Unplug this apparatus during lightning storms or when unused for long periods of time. The unit should be serviced only by qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. The Yorkville 50kb/kw is appropriate to use with just about anything that produces an audio signal. This includes such items as professional or home keyboards, acoustic guitars (with pickups), microphones, or other audio sources such as CD-players or even cassette decks. No matter what, the Yorkville 50kb/kw will sound great and be dependable for years to come. The Yorkville 50kb/kw has two input channels, both input channels can be used simultaneously. As an example, you could use a microphone on Channel 1 and a stereo keyboard on Channel 2. You can balance the loudness of the two sources by adjusting each individual channel's volume control. Channel 1 is optimized for microphones, however the phone jack can also accept line level inputs from an acoustic guitar (with pickup), electronic keyboard, CD-player or other audio sources. This channel offers more gain than Channel 2, it's advised that the source with the lower level output be connected to Channel 1. Adjust the volume control for the level of sound desired. The phone jack can also use regular unbalanced cables. For best results, and reduced noise, it is advised that you use balanced (stereo) cables for interconnection wherever possible. â· Do Not use both the phone and XLR inputs on Channel 2 at the same time. Channel 2 - This channel is optimized for line level signals such as an electronic keyboard, CD-players, cassette decks, or other audio sources. The channel also sums stereo signals properly for use with this single amplifier system. You can utilize this feature either by using the two phone jacks or the two RCA jacks (both sets of jacks can be used at the same time). [. . . ] The audio heard through stereo headphones will be a mono signal separated into the two earpieces. Caution: Always exercise caution when using headphones to avoid permanent hearing loss. When the Yorkville 50kb/kw is turned on, the LED beside the power switch will be illuminated. Unlimited Warranty Yorkville's two and ten-year unlimited warranty on this product is transferable and does not require registration with Yorkville Sound or your dealer. [. . . ]