User manual TRAYNOR DG10

[. . . ] The apparatus should not be exposed to dripping or splashing water; no objects filled with liquids should be placed on the apparatus. Terminals marked with the "lightning bolt" are hazardous live; the external wiring connected to these terminals require installation by an instructed person or the use of ready made leads or cords. Ensure that proper ventilation is provided around the appliance. No naked flame sources, such as lighted candles, should be placed on the apparatus. [. . . ] CD Input This input can be used to connect a CD player, MP3 Player or other audio device enabling you to jam along with your favourite tunes. Power Switch This switch turns your amplifier on or off. The green LED next to the switch illuminates when amplifier power is on. Phones Connect a pair of ¼-inch stereo headphones to this jack. This enables the amplifier to drive an extension speaker cabinet without using the DG's internal speaker or can be used for silent practice. A two-channel design allows the player to switch between a pristine clean tone and searing overdrive for awesome leads at the touch of a switch. the Traynor DG15R's real spring reverb adds an authentic vintage vibe to your tone pallet. Perfect for practice, the Traynor DG15R has RCA line inputs for quick connection of a CD, MP3 Player or other audio device, allowing any audio source to be mixed with the guitar for playalong practice. The 1/4-inch headphone jack, with speaker defeat, makes the Traynor DynaGain DG15R an ideal amplifier for practicing privately. Hi and Lo Input Jacks Connect your guitar using a shielded ¼-inch guitar cable to this jack. For a bright, high gain sound, use the jack labelled Hi. For a darker, lower gain sound use the jack labelled Lo. If you use both jacks simultaneously, both jacks will be high gain. Channel 1 uses the Gain control to allow more flexibility when trying to achieve the perfect amount of distortion. For greater distortion turn the dial clockwise, for less, dial the control counter-clockwise. A bluesy tone, with a bit of crunch, can be achieved by increasing this control's setting. Tone Controls Bass/Middle/Treble Use these controls to shape your tone. Reverb The Reverb control sets the level of reverberation mixed with the guitar signal. CD Input This input can be used to connect a CD player, MP3 Player or other audio device enabling you to jam along with your favourite tunes. Power Switch This switch turns your amplifier on or off. The green LED next to the switch illuminates when amplifier power is on. Phones Connect a pair of ¼-inch stereo headphones to this jack. [. . . ] The green LED next to the switch illuminates when amplifier power is on. Footswitch An optional two-button latching-type footswitch can be used for channel select and effects defeat. Phones Connect a pair of ¼-inch stereo headphones to this jack. If you use the Traynor DynaGain amplifier as a preamp for recording or to drive another guitar amplifier and do not wish to use the internal speaker don't forget to depress the Internal Speaker Defeat to disable the DG's internal speaker (or you just want to use the headphones alone). [. . . ]