User manual TRAYNOR YS1053

[. . . ] Use only with cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Follow the manufacturer's instructions when installing the product and use mounting accessories recommended by the manufacturer. The apparatus should not be exposed to dripping or splashing water; no objects filled with liquids should be placed on the apparatus. Terminals marked with the "lightning bolt" are hazardous live; the external wiring connected to these terminals require installation by an instructed person or the use of ready made leads or cords. [. . . ] Input Jacks ­ two ¼-inch phone jacks. Channel Select Switch ­ Channel 1 is optimized for lead, Channel 2 for clean sound Channel 2 Gain and Volume Controls. Master Control ­ Adjusts the amount of output power available. Reverb Control ­ Adjusts the 24-bit DSP reverb level for both channels Headphone Jack ­ Speaker emulated output. aux In ­ For connection of CD-player or an MP3 player. Power Indicator ­ Illuminates green when the amplifier is turned on. Power Switch Extension Speaker jack ­¼-inch phone jack. A yellow LED located next to the Channel 1 Volume control illuminates when Channel 1 is active. Master Control This Master control not only adjusts the overall volume level of the DG60R but also provides control of the output power. The DG60R's power amplifier has been designed to behave akin to a "tube" power amplifier stage and will provide the same level of compression and soft clipping at all volume levels. The dial has been calibrated to let you know how many watts you're working with. The Gain control is used to adjust the amount of overdrive, while the Volume control allows you to set the actual loudness of the amplifier. Boost Switch The boost circuit enables you to achieve `a-bit-more' overdrive for leads when needed. The Boost can be selected via the front panel switch or through the footswitch pedal. a red LED illuminates to indicate when the boost is active. Channel 1 Tone Controls The Treble, Bass, and Middle tone controls are used to help shape your sound. These are active only when Channel 1 is selected. Contour Control The Contour control adjusts the amount of mid-scoop, which allows you to dial-in character to your tone from vintage to modern, and all points in between. Reverb Control The Reverb control adjusts the overall reverb level for both channels. The DG60R is equipped with a 24-bit DSP based effects processor for lush large room reverb. [. . . ] The switching is accomplished with internal FET's so there is no audio flowing through the footswitch cable. The DG60R is compatible with most aftermarket latching dual-footswitch pedals although we do recommend the Traynor TFS-2B latching dual-footswitch, with 10-foot cable. reverb Defeat Jack Connecting a footswitch to the rear mounted Reverb defeat jack can defeat the internal effects. A footswitch can be used for this purpose. [. . . ]