User manual TRENDNET TBW-106UB

[. . . ] Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and radiates radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] (2) Remove: Remove the Auto-Connection device assignment for the selected port. 13 Figure 4 Quick Connect Configurations->Unplug HID --- Remove Human Interface Devices from BlueSoleil. (Figure 5) Unplug: Unplug the selected HID device. When you first connect the HID device to your computer, BlueSoleil sets up the devices so that they will automatically reconnect in case the connection is ever broken. After you unplug an HID device, it will no longer automatically reconnect to your computer. Figure 5 Unplug HID Device My Bluetooth Device --- Advanced hardware configuration, recommended for advanced users only. Please refer to Hardware Configuration for more details. Options --- Enable/Disable some other features like making BlueSoleil starts up with Windows, auto-checking online update or enable/disable prompts when doing some operations by checking/unchecking the related option. o Startup: (1) Start BlueSoleil when I start Windows --- BlueSoleil will start up with Windows if this 14 option is enabled. (2) Check for updates automatically --- A prompt will pop up to inform user checking update from BlueSoleil web site once BlueSoleil starting up. Note: The checking update function is enabled by default. o Others: (1) Prompt me before adding a "Quick Connect" item --- Inquiry if adding a new Quick Connect item once establishing a new outgoing SPP connection. (2) Prompt me before stopping a service to connect out --- Inquiry if stopping local service before connecting out. It only applies to PAN and Synchronization profiles. (3) Support VoIP Instant Messengers --- Inquiry if supporting VoIP function. Figure 6: Options Help Menu: Contents and Index --- Access BlueSoleil Online Help. Check for Update --- Access BlueSoleil web site to check if any update available. Online Support --- Find a solution or report a problem online. About BlueSoleil --- Information about your version of BlueSoleil. Bluetooth status Icon There are there statuses of Bluetooth icon in the system tray. 15 Icon Meaning: --- BlueSoleil starts up, but Bluetooth is not active. --- BlueSoleil starts up and Bluetooth is active. --- There are existing Bluetooth connections. Right-click Popped-up Menu: Display --- Display the BlueSoleil main window on the desktop. Show messages --- Check whether to display the tip messages on the right corner. Support VoIP --- Check if BlueSoleil supports VoIP function. Exit --- Exit BlueSoleil program. Find Remote Devices To set up a Bluetooth connection, the remote device must be found first. There are 3 ways to find remote devices in BlueSoleil. Single-click the red ball in the main window to start inquiry. Bluetooth devices within the radio range will be shown around the center ball. [. . . ] It is recommended that users try to connect point to point if the connection cannot be set up. Verify whether both sides have input the right Bluetooth passkey if any side is at security level High. The Bluetooth passkey must be the same at both sides. If both sides have set Fixed Passkey (the default passkey) and the passkeys are different, the connection cannot be set up with the authentication failure error. How Bluetooth passkey works? [. . . ]