Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual TRENDNET TC-NT2. We hope that this TRENDNET TC-NT2 user guide will be useful to you.
Lastmanuals help download the user guide TRENDNET TC-NT2.
You may also download the following manuals related to this product:
TRENDNET TC-NT2 DATA SHEETS (246 ko)
Manual abstract: user guide TRENDNET TC-NT2
Detailed instructions for use are in the User's Guide.
[. . . ] It comes with shielded connectors, which enables the testing of shielded twisted pair (STP) cables. It also features the convenient Auto Scanning and Manual Scanning modes. Furthermore, a tone generator is also included and individual pins/wires can be selected to carrying a tone that can be picked up with Net Probe or any tone probe for you easily locate cables. [. . . ] The RX row of LED will light (or not), in relation to the TX row, to indicate status. (b) Manual Scan Mode: By pressing the TEST button, the tester will change from Auto Scan to Manual Scan mode. The TX row of LED will hold or flash to indicate the pin being tested. The RX row of LED will light (or not), in relation to the TX row, to indicate status. Any subsequent press of the TEST button will advance the LED to the next one in sequence (1, 2, 3, . . . , shield and repeat). (c) LED Status: When combining the information indicated by the RX and TX LEDs, a cable pin-to-pin configuration (cross,
3
straight, reverse, miss-wire. . . etc. ) can be determined. i) If more than one LED from the same row is lit or if TX & RX LEDs are unlit simultaneouslyThis indicates a short . open ii) If a LED is skipped - This may indicate an or a burnt out LED. iii) If no LED will light - please check or replace your battery. To test BNC, USB or other cable configurations please use the appropriate adapters and follow the above procedure. See RX and TX LED for test result.
4
B. Connect one end of the test cable to the MASTER unit marked TX . Set the power switch to ON and set the tester to Auto scan. The TX LED will begin to scroll in sequence (1, 2, 3, . . . , shield and repeat), to indicate the pins being tested. Use a patch cord (included) if the test cable terminates into a wall jack or patch panel. At the remote location, connect the other end of the test cable to the Remote terminator. [. . . ] Please make sure the battery is fresh and have sufficient power. If a battery is weak or fails, the LED indicators will be dim or fail to light. Please take out the battery if you do not need to use the tester for any extended period.
F. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TRENDNET TC-NT2
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual TRENDNET TC-NT2 will begin.
TRENDNET TC-NT2 DATA SHEETS (246 ko)
