User manual TRENDNET TE-CF100

[. . . ] Compact Flash Size 10/100 Fast Ethernet LAN Card For Both Notebook PC and Windows CE-based PDA / Palm PC Users Guide Doc. No. :101802-01 FCC REGULATORY STATEMENTS Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interface, and 2. [. . . ] Windows NT will copy necessary files to your computer. When the Network window reappears, click on the Bindings tab. Click on the Protocols tab and select your settings. Run the NetWare Client Install V1. 21: Get the 4 Client disks from the network administrator, or Run the \NWCLIENT\INSTALL. EXE in a previous Installation 2. A message appears on the screen asking you if you want the program to perform modifications on your AUTOEXEC. The program then modifies your AUTOEXEC. BAT and CONFIG. SYS files accordingly and creates backup copies. When the following message appears "Install support for MS Windows?(Y/N)", answer accordingly and provide a path if necessary. When the program displays the following as "Configure your workstation for backup by a NetWare server running software such as BACKUP? - 21 - 3. 4. (Y/N):", answer accordingly and provide a path if necessary. From the driver list, select Other Drivers. Go to the Insert the Driver Disk dialog box and specify the path where the ODI driver and INS files reside. Press Enter and select the target ODI driver. Specify the driver's optional settings. 8. Highlight "Install press here" and press <Enter> to install. The program copies the necessary files for NetWare Client. Continue the installation procedure to completion. Upon completion, a new NET. CFG file will be created in your DOS directory. Typically, this file contains the following lines: Link Driver LE100ODI #FRAME Ethernet_802. 3 FRAME Ethernet_802. 2 : 12. Copy the file LANEN. EXE from the directory \ENABLER in the driver diskette to Netware Client directory. Add an running LANDEN command at the - 22 - beginning of the file. An STARTNET. BAT for the ODI workstation performs as the following LANEN /IOP=nnn /IRQ=n --Card Enabler SET NWLANGUAGE=ENGLISH --Set NetWare 4. X to English language LSL --Link Support Layer Module provided by Novell LE100ODI --Hardware Specific Module IPXODI --IPX Protocol Stack Module provided by Novell VLM --DOS Support Module provided by Novell F: --Change to connected device --Login to file server as LOGIN xxx user xxx 14. Run STARTNET to access the Novell network. [. . . ] Click OK Installing NDIS2 driver for IBM LAN Server 4. 0 1. In the OS/2 Desktop group, double-click on the MPTS icon. Select the LAN adapters and protocols option. Insert the driver diskette and type the driver path: A:\OS2\NDIS2. [. . . ]