User manual TRENDNET TE100-DM24 DATA SHEET

[. . . ] TRENDnet TRENDware, USA TE100-DM24 The TE100-DM24 dual speed SNMP stackable master hub provides a phenomenal level of flexibility and ease of use for migration to higher bandwidth network environments. [. . . ] A stack of TE100-DM24/DS24 hubs operates as a class II Fast Ethernet repeater, allowing linkage to another Class II Fast Ethernet Stack in the same collision domain. One 100Base-TX switched port module and one switched 100Base-FX port are also available, in addition to the TE100-DSM switch module, for greater configuration flexibility. FEATURES Plug and Play installation with automatic port configuration Supports 24 10/100Mbps auto-sensing and auto-negotiation ports Uplink port provides easy expansion to another hub Stackable to five units for a total of 120 ports Scalable expansion of up to two stacks for a total 238 ports One management hub) controls an entire stack of dual speed hubs (max. four hubs) TE100-DM24 stacks can make use of additional switch modules for redundancy EIA-19" rack mountable High visibility LED indicators provide status for each port Bandwidth utilization LED array for traffic volume display Automatic Hub ID assignment and front panel display Built-in auto-partitioning instantly isolates network failures One RS-232 port allows local terminal access to hub configuration, diagnosis, and firmware upgrade Slide-in switch module allows bridging between 10Mbps and 100Mbps segments, just one switch module is required for entire stack Slide-in switch module for one 100Base-TX connections or one 100Base-FX connection 5 Year Warranty BENEFITS Upgradable: Ethernet workgroups can be upgraded to Fast Ethernet without changing hubs. Expandable: Connect up to 120 users per stack. Also stackable with TE100-D16s hubs. Flexible: All 10 and 100Mbps users can exist on one hub. Cost Effective: Provides 10Mbps and 100Mbps SNMP stackable hub, and 10/100Mbps switch functionality in one unit. Performance: Full 100Mbps connectivity significantly boosts network performance. TE100-DM24 (11-17-2002) TE100-DM24 24-port 10/100Mbps Dual Speed SNMP Stackable Master Hub SPECIFICATIONS Standards: · IEEE 802. 3µ 100Base-TX/100Base-FX, and IEEE 802. 3 10Base-T Protocol: · CSMA/CD Speed: · 10Mbps for 10Base-T · 100Mbps for 100Base-TX Cabling: · CAT 3, 4, 5 UTP/STP for 10Base-T · CAT 5 UTP/STP for 100Base-FX 62. 5/125 micron multi mode SC fiber (2km) Daisy-Chain Port: · SCSI 50 pin x 2 Console Port: · DB-9 (9 pin) DCE RS-232 x 1 Power: · Internal Power Supply, (100 - 240V, 50/60Hz) LED's: · Per Hub: Power, Collision (10, 100) Slot 1 or 2, Hub ID, Bandwidth Utilization %, Console and SNMP · Per Port: Link/Rx, Auto Partition, Disable, Port Speed (10Mbps, 100Mbps) Dimensions: · 441 x 237 x 55 mm 17. 36" x 9. 33" x 2. 17" (L x W x H) Weight: · 3. 87 kg / 8. 53 lb. Temperature: · Operating: -10° to 55° C / 14° to 131°F · Storage: -25° to 80° C / -13° to 176°F Humidity: · 5% to 95% (non-condensing) Certification: · FCC, UL, VCCI, CSA, C-tick, TUV, CE UL R ® NETWORKING SOLUTIONS PRODUCT INFORMATION TE100-DM24: 24-port 10/100Mbps dual speed SNMP stackable Master hub TE100-DS24: 24-port 10/100Mbps dual speed stackable hub TE100-DSM: 10/100Mbps switch slide-in module TE100-DFXM: Switch 100Base-FX slide-in module TE100-DTXM: Switch 100Base-TX slide-in module ORDERING INFORMATION TRENDware International, Inc. USA Tel: 310-891-1100 Fax: 310-891-1111 Web: www. trendnet. com Email: sales@trendware. com R To Order Please Call: 1-888-326-6061 TRENDnet TRENDware, USA TRENDnet is a registered treademark of TRENDware International, Inc. [. . . ] For the most recent product information please visit ____________________ Copyright © TRENDware International, Inc. [. . . ]