User manual TRENDNET TE100-PS1PLUS

[. . . ] 6 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Product CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Start-up Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Physical Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Login your administrator (default: admin) and password (default: admin). After you have logged in successfully, setting General Configuration dialog appears. 48 4. Select your codepage form File Server Codepage box and click Apply. 6. 5 Adding Your USB Mass Storages to Network with Security You can use the following protocols to share your USB Mass Storages with user level security in network: SMB/CIFS: NetBIOS over TCP/IP FTP The protocols are shown in Supported Protocols box of the Control Center or the Server's web pages. 6. 5. 1 Setting up File Server Using the Control Center 1. Start the Control Center and Auto-searching Server window will appear. If the tool finds multiple Servers in your local area network, then you have to select one Server from the Server List. Double click the highlight list and enter the Server's administrator (default: admin) and password (default: admin). After you have logged in successfully, click Supported Protocols. 49 5. Set up File Server Configuration: A. Set SMB/CIFS Print/File Server Enable SMB/CIFS Print/File Server: select the item, if you want to support SMB/CIFS print/File server. Enable Internet Access: clear the item, if you do not allow that users can access your SMB/CIFS server via Internet. If you select the item, you allow Internet users can access your storage using the SMB/CIFS protocol. If you clear the item, your FTP server will not support anonymous login function. Storage Access Mode: To use FTP and SMB/CIFS to access storage, please set the storage access mode to the server mode. For the NetUSB mode, please refer to chapter 9. 6. 5. 3 Using Shared Storages by SMB/CIFS Method for Windows 1. Connect a USB storage device to this product. Click Display the Computers of Workgroup 4. Double click Microsoft Windows Network icon. Double click the Workgroup that the Server belongs to. The default Workgroup name is "WORKGROUP". You can refer to Control Center or the Server's web pages to get it. You will see that the Server is displayed as its server name. [. . . ] (For TRENDnet 301, only USB1 LED will blink. ) Please note that after that, the Server will operate using the factory default values after restarting, i. e. , your Server's configuration will recover to Factory Default values. Start the TFTP client Tool: Image Burner 3. Click Open Image to open your new firmware. Please note that you must configure your PC's TCP/IP such that PC and the Server belong to the same LAN, i. e. [. . . ]