User manual TRENDNET TE100-S24V

[. . . ] TE100-S24V 24-Port 10/100Mbps Fast Ethernet Smart Switch User's Guide FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user's guide, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense. VCCI Warning This is a product of VCCI Class A Compliance. CE Mark Warning This is a Class A product. [. . . ] The functions of these two items are illustrated in the following sections. System The following options are available in the System screen; Factory Reset, Change Password, Confirm Password, Refresh Time, Login Timeout, and System Uptime. File You can upload or download the Switch's configuration settings by using Upload Configuration or Download Configuration in the File setting screen. Statistics In the Statistics menu screen, you can view each port's data transferring and receiving status. Navigating The Console After entering the configuration program, you will see available command keys at the bottom of each menu screen. [Tab]: Move from current field to the next available field. and : Move cursor from field to field. 15 [Enter]: Execute selection [Space Bar]: Change selection. Available when the field has multiple selections. Login Execute the terminal emulation program on the remote workstation, connect the serial cable, and turn on the Switch. The login screen will ask you to input a password to login. Password: admin (default password) Figure 10. Login Move the cursor to highlight Password, input the default password admin and hit Enter, the cursor will then moves to login, hit Enter again to login. 16 Main Menu After login the console, the main menu appears (see Figure 11). You can see the available console command keys in the lower portion of the screen. Move cursor to highlight a desired option by using Up Arrow, Down Arrow, and Tab keys, and then press Enter key to confirm. The four options in the Main Menu screen are Setup, System, File, and Statistics. Figure 11. Main Menu Configuring Setup Settings There are Port Configuration and VLAN settings in Setup menu (see Figure 12). 17 Figure 12. Setup Menu Port Configuration In Port Configuration menu (Figure 13), you can configure each port's (port 25 is reserved for optional Fiber Port) Speed, Flow Control, and QoS. Link Status is determined by the Switch and can't be changed. This screen displays Port 01 ~ 12 status, for port 13 ~ 25, please select Next. After completing the setup, move cursor to Save and hit Enter to save the settings. 18 Figure 13. Port Configuration (1) Speed There are five speed modes-- Auto, 100M Full, 100M Half, 10M Full, and 10M Half. To change the speed setting, highlight Port, enter the port number and hit Enter, and the cursor will move to the next field Speed. Hit Space Bar to select one of the speed options. [. . . ] If your VLAN settings do not perform the way they should, you can reset the Switch back to its default state by going to "System" menu and select "Factory Reset". Configuring System Setting The System configuration menu screen (see Figure 17) indicates the following options: Factory Reset: Restore all settings back to factory default. 22 Change Password: To change the login password (maximum 20 digits / letters). Confirm Password: To confirm the new password. Refresh Time: To set the automatic status refreshing time. You can select Disabled, 1 sec. , 5 sec. , 10 sec. , 15 sec. , or 20 sec. [. . . ]