User manual TRENDNET TEW-223PI

[. . . ] 802. 11b Wireless PCI Card User Manual Doc. No. : 102202-02 REGULATORY STATEMENTS FCC Certification The United States Federal Communication Commission (FCC) and the Canadian Department of Communications have established certain rules governing the use of electronic equipment. Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interface, and 2) This device must accept any interface received, including interface that may cause undesired operation. [. . . ] The Choose Destination Location screen will show you the default destination chosen by the utility. Follow the instruction to select the program folder. In Start Copying Files, click Next to continue. - 16 - 6. Click Finish. - 17 - Network Connection Once the driver has been installed, you must make some changes to your network settings. In Windows 98/ME 1. 2. Go to Start Settings Control Panel Network. Make sure that the following components are installed. 802. 11b Wireless PCI Card IPX/SPX-compatible Protocol NetBEUI TCP/IP - 18 - If any components are missing, click on the Add button to add them in. All the protocols and clients required and listed above are provided by Microsoft. After clicking Add, highlight the component you need, click Add. 4. Highlight Microsoft, and then double click on the item you want to add. For making your computer visible on the network, enable the File and Print Sharing. Make up a name that is unique from the other computers' names on the network. Type the name of your workgroup, which should be the same used by all of the other PCs on the network. - 19 - 7. Make sure that "Share-level access control" is selected. If connecting to a Netware server, share level can be set to "User-level access control. " 8. When finished, restart your computer to activate the new device. Once the computer has restarted and Windows has booted up, a Logon window will appear and require you to enter a username and password. Make up a username and password and click OK. Do not click the Cancel button, or you won't be able to log onto the network. Double-click the Network Neighborhood icon on the windows desktop, and you should see the names of the other PCs on the network. In Windows 2000/XP 1. (In Windows 2000) Go to Start Settings Control Panel Network and Dial-up Connections Local Area Connection Properties. (In Windows XP) Go to Start Control Panel Network Connections Wireless Network Connection Enabled 802. 11b Wireless PCI Card Properties. - 21 - 2. Make sure that you have all the following components installed. Client for Microsoft Networks NWLink NetBIOS NWLink IPX/SPX/NetBIOS Compatible Transport Protocol Internet Protocol (TCP/IP) 3. [. . . ] Enable the check box to use Windows to configure. * Use Manufacturer's Configuration Utility Note: If you want to use the manufacturer's configuration utility to configure the wireless settings. Make sure the check box is NOT enabled, and then the Network Status icon will appear in the taskbar. You can open it by double-clicking the icon. * Use Windows to configure Note: If you want to use Windows XP's Wireless Configuration Utility to configure the wireless settings, make sure this item is enabled. [. . . ]