User manual TRENDNET TEW-432BRP

[. . . ] i Regulatory notes and statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions however are far much less than the electromagnetic energy emissions from wireless devices like for example mobile phones. Wireless LAN devices are safe for use frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or environments for example: ·Onboard airplanes, or ·In an explosive environment, or ·In case the interference risk to other devices or services is perceived or identified as harmful In case the policy regarding the use of Wireless LAN devices in specific organizations or environments (e. g. [. . . ] Daylight Saving: Enables users to enable or disable daylight saving time. When enabled, select the start and end date for daylight saving time. Dynamic DNS This synchronizes the DDNS server with your current Public IP address when you are online. First, you need to register your preferred DNS with the DDNS provider. DDNS: Enable to allow WLAN router to allow DDNS service. Server Address: Select DDNS service on the pull down menu. Host Name: Enter host name of DDNS serve being used. User Name: Enter the User name of DDNS server being used Wireless This section enables users to configuration the wireless communications parameters for the WLAN Router. Basic This page allows user to enable and disable the wireless LAN function, create a SSID, and select the channel for wireless communications. Enable/Disable: Enables or disables wireless LAN via the WLAN Router. The SSID of any wireless device must match the SSID typed here in order for the wireless device to access the LAN and WAN via the WLAN Router. Channel: Select a transmission channel for wireless communications. The channel of any wireless device must match the channel selected here in order for the wireless device to access the LAN and WAN via the WLAN Router. SSID Broadcast: While SSID Broadcast is enabled, all wireless clients will be able to view the WLAN Router's SSID. For security purposes, users may want to disable SSID Broadcast to ensure only authorized clients have access. Security This page allows users to set the wireless security of the WLAN router for a secure wireless communication. Authentication Type: The authentication type default is set to open system. There are four options: Disabled, WEP, WPA, WPA2 and WPA-Auto. WEP Encryption WEP: Open System and Shared Key requires the user to set a WEP key to exchange data with other wireless clients that have the same WEP key. . Mode: Select the key type: ASCII or HEX WEP Key: Select the level of encryption from the drop-down list. The WLAN Router supports, 64 and 128-bit encryption. Key 1 ~ Key 4: Enables users to create up to 4 different WEP keys. Manually enter a set of values for each key. Select a key to use by clicking the radio button next to the key. WPA/WPA2/WPA-Auto Security If WPA, WPA2 or WPA-Auto EAP is selected, the above screen is shown. Please set the length of the encryption key and the parameters for the RADIUS server. [. . . ] Type the host name or IP address in the text box and click Ping. TECHNICAL SPECIFICATIONS General Standards Protocol Radio Technology Data Transfer Rate IEEE 802. 3u 100BASETX Fast Ethernet IEEE 802. 11g; IEEE 802. 11b CSMA/CD IEEE 802. 11g Orthogonal Frequency Division Modulation 802. 11b: 1, 2, 5. 5, 11Mbps (auto sense) 802. 11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps(auto sense) Ethernet: 10Mbps (half duplex), 20Mbps (fullduplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Star 54Mbps: Typical 70dBm @ 10% PER (Packet Error Rate) 11Mbps: Typical 85dBm @ 8% PER (Packet Error Rate) 13±2dBm typically @ 802. 11g 15±2dBm typically @ 802. 11b 10BASET: 2pair UTP Cat. 3, 4, 5 (100 m), EIA/TIA 568 100ohm STP (100 m) 100BASETX: 2pair UTP Cat. 5 (100 m), EIA/TIA568 100ohm STP (100 m) 2412 ~ 2484 MHz ISM band DBPSK/DQPSK/CCK/OFDM 64/128bits WEP Encryption; WPA, WPAPSK, WPA2, WPA2PSK 1~11 Channels (US) 1~13 Channels (EU) LAN: 4 x 10/100Mbps AutoMDIX Fast Ethernet port WAN: 1 x 10/100Mbps AutoMDIX Fast Ethernet port Topology Receiver Sensitivity TX Power Network Cables Frequency Range Modulation Schemes Security Channels Number of Ports Physical and Environmental DC inputs Temperature Humidity Dimensions EMI: 7. 5VDC/1A Operating: 0oC ~ 40o C, Storage: 10o ~ 70o C Operating: 10% ~ 90%, Storage: 5% ~ 90% 147 x 115 x 35 mm (W x H x D) without Antenna FCC, CE Power Consumption 5W (Max) Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. Wireless 3 years If a product does not operate as warranted above during the applicable warranty period, TRENDnet shall, at its option and expense, repair the defective product or deliver to customer an equivalent product to replace the defective item. All products that are replaced will become the property of TRENDnet. [. . . ]