User manual TRENDNET TEW-444UB QUICK INSTALLATION GUIDE

[. . . ] Wireless Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 2 4 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before You Start Package Content TEW-444UB Utility & Driver CD-ROM Quick Installation Guide USB 2. 0 Extension Cable System Requirements CD-ROM Drive Computer with an available USB 1. 1 or 2. 0 port CPU: 300 MHz or above Memory: 32MB or above Windows 98SE/ME/2000/XP/2003 Server Application Workstation with 108Mbps Wireless USB 2. 0 Adapter (TEW-444UB) Workstation with 108Mbps 802. 11g Wireless PCI Adapter (TEW-443PI) 108Mbps Wireless Access Point (TEW-450APB) Internet Notebook with 108Mbps 802. 11g Wireless PC Card (TEW-441PC) Cable/DSL 4-Port Firewall Router (TW100-BRF114) Cable/DSL Modem 1 English 2. [. . . ] The configuration is now complete. Wireless installation is now complete. For detailed information regarding the TEW-444UB configuration and advanced settings, please refer to the User's Guide included on the Utility & Driver CDROM or TRENDnet's website at www. trendnet. com 5 English Troubleshooting Q1: I inserted the Utility & Driver CD-ROM into my computer's CD-ROM Drive and the installation menu does not appear automatically. A1: If the installation menu does not appear automatically, click Start, click Run, and type D:\setup. exe where "D" in "D:\setup. exe" is the letter assigned to your computer's CDROM Drive. And then click OK to start the installation. Q2: When I open up the utility, all the buttons are greyed out. A2: Verify that the device is installed properly. Right click on My Computer -> Properties. Make sure that 802. 11g Wireless Network Adapter is listed and there is no yellow question mark or exclamation point. Q3: When I click on Scan, I can not see my SSID. A3: Log on to your wireless router or access point and make sure that the SSID broadcast option is not disabled. Make sure the wireless light on your wireless router or access point is on. Q4: I completed all the steps in the Quick Installation Guide, but my Wireless USB Adapter isn't connecting to my access point. A4: First, verify that the Network Name (SSID) matches your wireless router or wireless access point's SSID. Second, check your TCP/IP properties to ensure that Obtain an IP address automatically is selected. Third, click Profile Management -> Scan in the Wireless Client Utility to check and see if there are any available wireless networks listed. Third, click Profile Management -> Scan in the Wireless Client Utility to check and see if there are any available wireless networks listed. Q5: The utility program shows good signal strength, but I can not get onto the Internet. [. . . ] Check with you Local Authority or Retailer for recycling advice. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. 6 TRENDnet Technical Support US . Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany . [. . . ]