User manual TRENDNET TEW-453APB

[. . . ] TABLE OF CONTENTS CHAPTER 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features of your Wireless Access Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Physical Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Note that both Dynamic and Static keys can be used simultaneously, allowing clients using either method to use the Access Point. Enter the WEP key according to the WEP Key Size setting above. Wireless stations must use the same key. Wireless stations must use the same key index. Enable this if you want this Access Point to send accounting data to the Radius Server. If enabled, the port used by your Radius Server must be entered in the Radius Accounting Port field. Static WEP Key (EAP-MD5) WEP Key WEP Key Index Radius Accounting Update Report every . . . If Radius accounting is enabled, you can enable this and enter the desired update interval. This Access Point will then send updates according to the specified time period. 33 Wireless Access Point User Guide Radius MAC Authentication UAM The current status is displayed. Click the Configure button to configure this feature if required. Click the Configure button to configure this feature if required. 34 Access Point Setup System Screen Click System on the menu to view a screen like the following. Figure 20: System Screen Data - System Screen Identification Access Point Name Description Country Domain IP Address DHCP Client Fixed Select this option if you have a DHCP Server on your LAN, and you wish the Access Point to obtain an IP address automatically. If selected, the following data must be entered. · · · · IP Address - The IP Address of this device. Enter an unused IP address from the address range on your LAN. Subnet Mask - The Network Mask associated with the IP Address above. Enter the value used by other devices on your LAN. Gateway - The IP Address of your Gateway or Router. Enter the value used by other devices on your LAN. DNS - Enter the DNS (Domain Name Server) used by PCs on your LAN. Enter a suitable name for this Access Point. If desired, you can enter a description for the Access Point. Select the country or domain matching your current location. 35 Wireless Access Point User Guide WINS Enable WINS WINS Server Name/IP Address If your LAN has a WINS server, you can enable this to have this AP register with the WINS server. Enter the name or IP address of your WINS server. 36 Access Point Setup Wireless Screens There are two (2) configuration screens available: · · Basic Settings Advanced Basic Settings Screen The settings on this screen must match the settings used by Wireless Stations. Click Basic on the menu to view a screen like the following. Figure 21: Basic Settings Screen Data - Basic Settings Screen Operation Wireless Mode Select the desired option: · · · Disable - select this if for some reason you do not this AP to transmit or receive at all. [. . . ] The default values are admin for the User Name, and password for the Password. Once connected, you can use any of the commands listed in the following Command Reference. 2. 3. Using the CLI - Serial Port 1. Use a standard serial port cable to connect your PC to the serial (RS232) port on the Wireless Access point. For example, in Windows, use HyperTerminal. [. . . ]