User manual TRENDNET TEW-603PI

[. . . ] 1 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Click to apply changes after modifying settings. Use the Up/Down buttons to move the selected profile to the top of the list or to the bottom. When in the Network screen, the TEW-603PI attempts to connect to the network at the top of this list first IP Address Add (button) Remove (button) Properties (button) Apply (button) Up (button) Down (button) The SiteSurvey Screen Use the SiteSurvey screen to scan for available networks in your vicinity. 23 AVAILABLE NETWORKS The Available Networks pane settings are described below. SSID Shows the name (usually the equipment vendor's name) assigned to a wireless Wi-Fi network. Click to refresh the list of currently available networks. Mode Strength Ch Security Refresh (button) Detailed Info (button) Click to view properties for the selected network. Screen below. ) Click to connect to the selected network. (The network is not Connect (button) added to the profile list. ) Add To Profile (button) Click to add the network to the profile list. DETAILED INFO. SCREEN For details about any of the listed access points, select it from the list and click Detailed Info to see the following screen. (You can also double-click an access point to view the Detailed Info screen. 24 The Options Screen By default, the Wireless Client Utility configures your wireless settings. Use this screen to disable the Wireless Client Utility. OPTIONS The Options pane settings are described below. Let Windows manage this wireless adapter (tick box) When you check the Let Windows manage this wireless adapter checkbox, Windows Zero Configuration manages your wireless settings. The Wireless Client Utility still shows the link status of the adapter. Click to execute the changes. Apply Now (button) 25 The Version Screen This screen displays the software and hardware information of the adapter. You cannot make changes to this screen. Reference the Version screen if you need to contact technical support. See "Maintenance". 26 Configuring Wireless Security This chapter covers the configuration of security options in the 802. 11 Wireless Client Utility. Configuring Security When you create a profile you need to configure the security settings with the information provided by the administrator. You modify security settings by selecting the profile and clicking Properties. C ONFIGURING W E P Refer to the following to modify WEP settings. 27 1. In the Properties window, click WLAN Security. 2. 3. Click the drop-down arrow at Security Mode and choose WEP. Click the Use Static WEP checkbox. 28 4. The WEP Configuration screen appears. WEP Method Select the encryption to match your access point: 64, 128, or 152-bit. The encryption level must match the encryption level used by your access point. Options are Auto, Open System, and Shared. A WEP Key is automatically generated as you type in any Passphrase of your choice. Use this feature when you have used a Passphrase to generate your WEP key on your access point. [. . . ] computer cannot communicate with the other computer. 40 Infrastructure Make sure that the AP and the associated computers are turned on and working properly. Make sure the TEW-603PI computer and the associated AP use the same SSID. Change the AP and the associated wireless clients to use another radio channel if interference is high. Make sure that the computer and the AP share the same security option and key. [. . . ]