User manual TRENDNET TEW-646UBH

[. . . ] Table of Content Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This feature is similar to "tethering" and will allow you to share an Internet connection to other wireless clients. Please note that to share internet connection the computer with the Micro Wireless N USB Adapter must have a valid Internet connection using a wired connection. 6 Refresh About Click this option to refresh the utility for any changes. This screen displays information about the Micro Wireless N USB Adapter, such as the Driver and Utility version. When a new version of the utility becomes available for upgrade, users will be able to identify by version numbers. STATION MODE This mode is the default mode for the wireless adapter. When this mode is selected the wireless adapter functions as a wireless client. General This is the default screen after launching the Utility program. Status: Shows if the associated status of the wireless adapter SSID: Shows the current SSID, which must be the same as your wireless access point or router in order to establish the connection correctly. 7 Speed: Shows the current connection speed. Type: Shows the connection type of Infrastructure of Ad-Hoc. Encryption: Shows the current encryption mode used. SSID: Shows the SSID the adapter is associated with. Signal Strength: Shows the wireless signal strength of the connection between the adapter with the Access Point. pink Quality: Shows the wireless link quality between the adapter and access point. MAC Address: Shows the MAC address information of the adapter IP Address: Shows the IP address the adapter obtained from the access point. Subnet Mask: Shows the subnet mask the adapter obtained Gateway: Shows the gateway information obtained be the adapter. Profile This screen is where you set the basic wireless settings of the wireless adapter. Profile Name: You can modify the Profile Name to anything you would like, for example Home, Office, Play Room and etc. SSID: Service Set Identifier, which is a unique name shared among all wireless clients in a wireless network. The SSID must match the wireless access point or router's SSID that you are connecting to. The user can enter the necessary information required for accessing the particular Access Point or Wireless Router. Remove: Deletes the selected profile 8 Edit: Edit an exist profile. Edit the SSID and select the Wireless Mode, Authentication and Encryption then click Apply to save the profile. When the Profile name was changed, a new profile will be added in the list. Duplicate: Duplicate the settings of the selected profile. Set Default: Selected a profile from list then click the Connect to connecting to the wireless network with the profile setting. Adding Profile ­ The user can create and manage the created profiles for home, work or public areas. By double-clicking on Add user can adjust to the specific setting such as SSID, channel, and encryption as saved by that particular profile. Ad-Hoc: Check this option to establish a point-to-point wireless communication directly with other wireless client devices. Profile Name: User can create a profile name to distinguish each wireless networks created. [. . . ] TRENDnet does not issue refunds or credit. Please contact the point-of-purchase for their return policies. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. [. . . ]