User manual TRENDNET TEW-652BRU

[. . . ] TRENDnet User's Guide Cover Page TRENDnet User's Guide Table of Contents Access your router management page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Change your router login password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Set your router date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Manually configure your Internet connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Any additional rules will take precedence over the default rules. Add ­ Saves a new protocol/IP filter. To modify an existing protocol/IP filter, click on the entry in the protocol/IP filter list. When selected, the entry will be highlighted. Delete ­ Removes an existing protocol/IP filter. Update ­ Modifies an existing protocol/IP filter. Cancel ­ Discard changes to an existing protocol/IP filter. © Copyright 2012 TRENDnet. Enabled ­ Selecting Enabled turns on the firewall ruler and selecting Disabled turns it off. Name ­ Enter a name for the firewall rule. Action ­ Select Allow will allow access and selecting Deny will block or deny access. Source ­ Configure the source information for the firewall rule. o o o Interface - Click the drop-down list and select LAN (your network) or WAN (Internet) depending on where the traffic will be coming from. IP Range Start ­ Changes the starting address for the firewall rule to apply (e. g. 192. 168. 1. 20) IP Range End ­ Changes the last address for the firewall rule to apply (e. g. 192. 168. 1. 30) Note: The IP Range Start and End specify the range of IP addresses that the firewall rule will apply. Both fields need to be completed so use the same value to specify a single IP address. Destination ­ Configure the destination information for the firewall rule. o o o Interface - Click the drop-down list and select LAN (your network) or WAN (Internet) depending on where the traffic will be coming from. IP Range Start ­ Changes the starting address for the firewall rule to apply (e. g. 192. 168. 10. 20) IP Range End ­ Changes the last address for the firewall rule to apply (e. g. 192. 168. 10. 30) Add ­ Saves a new firewall rule. Update ­ Modifies an existing firewall rule. Delete ­ Removes an existing firewall rule. Cancel ­ Discard changes to an existing firewall rule. TEW-652BRU Priority Up ­ Moves an existing firewall rule one step higher in priority. Priority Down ­ Moves an existing firewall rule one step below in priority. [. . . ] SMTP Password ­ Enter your password for your e-mail service. SMTP Server ­ Enter the IP address (e. g. mail. trendnet. com) of your e-mail server. SMTP Server Port ­ Enter the port used by your e-mail service. [. . . ]