User manual TRENDNET TEW-656BRG

[. . . ] 1 Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission. Trademarks All products, company, brand names are trademarks or registered trademarks of their respective companies. They are used for identification purpose only. Specifications are subject to be changed without prior notice. [. . . ] You can select one of the two filtering policies: 25 Allow all to pass except those match the specified rules Deny all to pass except those match the specified rules You can specify 8 rules for each direction: inbound or outbound. For each rule, you can define the following: · Source IP address · Source port · Destination IP address · Destination port · Protocol: TCP or UDP or both. · Use Rule# For source or destination IP address, you can define a single IP address (4. 3. 2. 1) or a range of IP addresses (4. 3. 2. 1-4. 3. 2. 254). For source or destination port, you can define a single port (80) or a range of ports (1000-1999). Add prefix "T" or "U" to specify TCP or UDP protocol. For example, T80, U53, U2000-2999, No prefix indicates both TCP and UDP are defined. Packet Filter can work with Scheduling Rules, and give user more flexibility on Access control. For Detail, please refer to Scheduling Rule. Each rule can be enabled or disabled individually. Click on "Save" to store your settings or click "Undo" to give up the changes. 26 Domain Filters Domain Filter prevents users under this device from accessing specific URLs. Domain Filter: Check if you want to enable Domain Filter. Log DNS Query: Check if you want to log the action when someone accesses the specific URLs. Privilege IP Address Range: Setting a group of hosts and privilege these hosts to access network without restriction. Domain Suffix: A suffix of URL can be restricted, for example, ". com", "xxx. com". Action: When someone is accessing the URL met the domain-suffix, what kind of action you want. Check "Drop" to block the access. Check "Log" to log this access. Click on "Save" to store your settings or click "Undo" to give up the changes. URL Blocking URL Blocking will block LAN computers to connect with pre-define Websites. The major difference between "Domain filter" and "URL Blocking" is Domain filter require user to input suffix (like . com or . org, etc), while URL Blocking require user to input a keyword only. In other words, Domain filter can block specific website, while URL Blocking can block hundreds of websites by simply a keyword. 27 URL Blocking: Check if you want to enable URL Blocking. URL: If any part of the Website's URL matches the pre-defined word, the connection will be blocked. For example, you can use pre-defined word "sex" to block all websites if their URLs contain pre-defined word "sex". [. . . ] Please contact the point-of-purchase for their return policies. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. [. . . ]