User manual TRENDNET TEW-684UB QUICK INSTALLATION GUIDE

[. . . ] Connect the Type A end (the other end of the USB cable) to an available USB port on your computer. 11. The computer will automatically detect and install the drivers. Your installation is now complete For detailed information regarding the TEW-684UB configuration and advanced settings, please refer to User's Guide included on the Utility & Driver CD-ROM or TRENDnet's website at http://www. trendnet. com. 4 3. On the bottom right-hand corner of the screen, double-click on the TRENDnet Wireless Utility icon. On Windows 7, if the icon does not appear, click the Show hidden icons arrow. 2. [. . . ] You must complete the installation installation of the TRENDnet Wireless Utility (as described in Section 2) before connecting the Wireless USB Adapter to your computer. Connect the Wireless USB Adapter to a different USB port on your computer. Verify the USB Adapter's LEDs are working properly. Please see the table below: LED/Button Color Green Power N/A Green Green Wireless Link/Act LED N/A Green Sequence On Off On Blinking Off On Blinking Off N/A Definition Device is on Device is off Wireless LAN is on or enabled Wireless data transmission Wireless LAN is off or disabled WPS authentication process is complete WPA authentication prociess is ongoing WPS is not activated or disabled Hold 3 seconds to activate WPS WPS WPS LED WPS Button Green N/A N/A 4. I cannot open the TRENDnet Wireless Utility. Access your device manager to make sure the adapter is installed properly. To access the device manager on Windows 7, click on the Windows icon on the bottom left-hand corner, click Computer, click System Properties and then click Device Manager. To access the device manager on Windows Vista, right-click Computer, click Properties and then click Device Manager. To access the device manager on Windows XP, right-click My Computer, click Properties, click the Hardware tab, and then click Device Manager. If you see a networking device with a yellow question mark or exclamation point: 1. Uninstall the device from device manager 2. Click the Windows / Start icon, click All Programs, click TRENDnet and then click Uninstall. If you still encounter problems or have any questions regarding the TEW-684UB, please refer to the User's Guide included on the Utility & User's Guide CD-ROM or contact TRENDnet's Technical Support Department. 8 Wireless Tips The following are some general wireless tips to help minimize the impact of interference within an environment. Assign your network a unique SSID Do not use anything that would be identifying like "Smith Family Network". Choose something that you would easily identify when searching for available wireless networks. Do not turn off the SSID broadcast The SSID broadcast is intended to be on and turning it off can cause connectivity issues. The preferred method of securing a wireless network is to choose a strong form of encryption with a strong and varied encryption key. Note: after setting up the SSID, encryption type and encryption key/passphrase, please make a note of them for future reference. You will need this information to connect your wireless computers to the wireless router/access point. Change the channel Most wireless access points and routers are defaulted to channel 6. If you have a site survey tool that will display the channels you can plan your channel selection around neighboring access points to minimize interference from them. If your site survey tool does not display the channel try using channels 1 or 11. [. . . ] Use the wireless adapter's site survey tool to determine the best antenna orientation for your wireless devices. Interference from devices that produce RF (radio frequency) noise can also impact your signal. Position your wireless devices away from anything that generates RF noise, such as microwaves, HAM radios, Walkie-Talkies and baby monitors. Any device operating on the 2. 4GHz frequency will cause interference. [. . . ]