User manual TRENDNET TEW-826DAP

[. . . ] 24 How to choose the type of security for your wireless network . Ii TRENDnet User’s Guide TEW-826DAP Features TRENDnet’s high performance AC2200 Tri-Band PoE+ Indoor Wireless Access Point, model TEW-826DAP, features three concurrent WiFi bands to maximize device networking speeds: two separate high performance 802. 11ac networks (5GHz1: 867Mbps / 5GHz2: 867Mbps) , and a 400Mbps Wireless N network. MU-MIMO technology processes multiple data streams simultaneously, increasing real-time WiFi performance on the WiFi access point when multiple devices access the network. [. . . ]  TEW-826DAP Note: Your configurations are not saved and applied until you click on Apply/Discard Changes button. The Save & Apply step saves and applies all configuration changes. 31 TRENDnet User’s Guide TEW-826DAP Configurations per band: Wireless Mode: If all of the wireless devices you want to connect with this Access Point can connect in the same transmission mode, you can improve performance slightly by choosing the appropriate mode. If you have some devices that use a different transmission mode, choose the appropriate mode. B/G/N mixed: Select this mode for the best compatibility. B/G mixed: This mode only allows devices to connect to the access point using older and slow 802. 11g technology and it thereby reduces the access point’s maximum speed to 54Mbps (typically not recommended). This mode does ensure the highest speed and security for your network, however, if you have older 802. 11g wireless clients, they will no longer be able to connect to this access point.  G only: This mode only allows devices to connect to the access point using older and slower 802. B only: This mode only allows devices to connect to the access point using older and slower 802. Note: Please check the specifications on your wireless devices for the highest wireless capability supported first before applying these settings. If you are unsure, it is recommended that you keep the default setting (B/G/N mixed) for the best compatibility. 5GHz Wireless  A only: This mode only allows devices to connect to the access point using older and slower 802. A/N mixed: This mode only allows devices to connect to the access point using older and slower 802. 11n technology and it thereby reduces the access point’s maximum speed to 54Mbps (typically not recommended). This mode does ensure the highest speed and security for your network, however, if you have older 802. 11a wireless clients, they will no longer be able to connect to this access point. 4GHz, 5GHz1, or 5GHz2) > Wireless Network This section outlines the available features to configure for the wireless 2. 4 GHz and both 5GHz bands when Access Point mode is selected. Log into your management page (see “Access the management page” on page 8). Click on the wireless band you would like to configure and click Wireless Network. [. . . ]  Cooling fan and internal power supply carry a one-year warranty TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use, or (iii) the product was subject to conditions more severe than those specified in the manual. [. . . ]