User manual TRENDNET TEW-P1PG

[. . . ] TABLE OF CONTENTS ABOUT THIS GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SYSTEM REQUIREMENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] DNS Server Address: DNS (Domain Name System) server is an Internet service that translates domain names into IP addresses. Enter at least one DNS IP Address in this field. UPnP: This option allows you to enable or disable UPnP mode. MAC Rendezvous: This option allows you to enable or disable MAC Rendezvous mode. Second HTTP Port: The default port for communication is via port 80, and you can change it according to your network configuration. Select Enable from the option and enter the desired port number in the following box. Microsoft Network Enter the name of the Workgroup that you want the print server associated with in this field. - 36 - AppleTalk Enter the AppleTalk Zone name in the box. In the following options, enter the related configuration, such as the printer type. LPT · Chooser Name: Display the print server's Port name. · Printer Type: Enter the printer's type in this box. · PostScript Level: Select from the pull-down menu (Level 1 or Level 2). · Font Group: Select from the pull-down menu. TIP: Once you have changed the settings in each option, click Save to store the settings, or Cancel to abandon. - 37 - Configuration User Printing Control By configuring the Enable User Printing Control option (Yes or No), the user in the User List is permitted to access the print server or not. For the user(s) who is not in the User List, you can also limit the access right by setting the Allow Undefined Users Printing option to Yes or No. - 38 - Define Users You can add/delete the user(s) to/from the User List. The User List at the bottom of the screen displays the current defined user and related information for the print server. TIP: Once you have changed the settings in each option, click Save to store the settings, or Cancel to abandon. - 39 - Configuration E-mail E-mail Account You can assign an E-mail address to the print server, so that your mail of the account can be printed out directly through the printer (ASCII text only). To enable this function, enter the E-mail account in the Print Server E-mail Address box. - 40 - - Incoming E-mail (POP3) Server Address: Enter the server address that is used to receive your E-mail in this box. Outgoing E-mail (SMTP) Server Address: Enter the server address that is used to send your E-mail in this box. If your mail server needs to verify the user when sending E-mail, you have to input the Account Name and Password. E-mail Notification You can set the print server to send an alter message when the printer status changes through E-mail. To enable this function, set the Enable e-mail notification for printer status changing option to Yes. Then, input the administrator's E-mail address in the Admin Email Address box. E-mail Printing E-mail Printing (ASCII Text Only): Select Enable to enable the E-mail printing function. - 41 - - Receive E-mail Interval: Enter the number in this box to set up the time (in minute) to check/receive E-mail regularly. TIP: Once you have changed the settings in each option, click Save to store the settings, or Cancel to abandon. - 42 - Configuration SNMP SNMP Management SNMP (Simple Network Management Protocol) is a set of protocols for managing complex networks Community 1/2/3: Enter a name in the Name box, and configure the Access Right by selecting Read Only or Read/Write from the pull-down menu. TIP: Once you have changed the settings in each option, click Save to store the settings, or Cancel to abandon. - 43 - Tools Tool Print Test Print Test Click Test to print a test page. - 44 - Tool E-mail Test E-mail Account Click Test to send a test E-mail to the given administrator's E-mail address. Receive E-mail Click Yes to immediately check and receive E-mail, and then print out the mail when available. - 45 - Tool Reset Reset Click Yes to immediately reset the print server. - 46 - Tool Factory Reset Factory Reset Click Yes to reload the factory settings of the print server. - 47 - Tool Firmware Upgrade Firmware Upgrade When a new version of firmware is available (e. g. downloading from the manufacturer's website), you can upgrade the firmware of your print server. to point to the firmware file, and then click Upgrade. - 48 - Tool Backup Backup Device Configuration to File Click Backup to backup your current configuration of the print server to file and then save in the computer. Restore Device Configuration from File You can reload a configuration that you saved before. to point to the backup file, and then click Restore. Click - 49 - Help About This screen displays the information of the print server. - 50 - 5 PRINTING IN WINDOWS 95/98/ME The Print Server can provide print services to TCP/IP networks using the lpr/lpd network printing protocol. Most UNIX systems are capable of supporting lpd, as is Windows NT/2000. [. . . ] Please confirm that AppleTalk is set to Active. A list of all networked PostScript printers will be displayed within the right column. Select Check this option. 3. Double-click the name of the Printer Port you wish to use. Printer Ports shown are examples only. The - 83 - 4. [. . . ]