User manual TRENDNET TEW-P21G

[. . . ] TABLE OF CONTENTS ABOUT THIS GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 SYSTEM REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Password: Enter the Administrator password (3-8 characters). To set up the password, please enter the password in the New Password box, and then enter the same one again in the Confirm Again box. Port Settings In this field, you can assign the Port Name for the print server, and the description for the USB port. It also allows you to select the PJL Printer setting (Yes or No). - 40 - NOTE: PJL (Print Job Language) has certain job requirements that must be met to work correctly. For more information, please refer to your printer's manual. - 41 - Configuration Wireless Wireless Interface Connection Mode: Select one of the three connection modes. · Infrastructure (default) - Connects to compatibly configured wireless AP or router in a WLAN. - 42 - - - Ad-Hoc - Connect to compatibly configured wireless clients in the peer-to-peer mode. You can manually input the name or select one from the pull-down menu. To search the available wireless AP within the network, click the Site Survey button. Wireless Channel: Select the channel from the pull-down menu. Transmission Rate: Select the data transmit rate from the pulldown menu. The default setting is Fully Automatic. · WEP Encryption This field allows you to configure the settings of data encryption. Please remember that the WEP key must be set before the data encryption is enforced. WEP Encryption: This option allows you to select Disable, 64 bits, and 128 bits for the encryption setting. WEP Key Format: You can decide the network key to be encoded by ASCII (ASCII characters) or HEX (hexadecimal digitals). Then, enter the key(s) for the network in the Key box (1~4). - 43 - Advanced Setting This field allows you to configure more settings, including: - Beacon Interval: Enter the number of beacon interval time in millisecond. - Preamble: This option allows you to set the length of preamble. Setting options are: Long - it is set to 144 bits; Short - it is set to 72 bits. - Authentication Type: You can set the authentication type by selecting the settings: Open System, Shared Key, and Both. TIP: Once you have changed the settings in each option, click Save to store the settings, or Cancel to abandon. - 44 - Configuration Network - 45 - TCP/IP This field contains three options that allow you to configure the TCP/IP setting: IP Address, UPnP, and MAC Rendezvous. IP Address: This option allows you to set the IP address manually or automatically. When you choose Manually Assign, you should enter the related information in the following boxes, including IP Address, Subnet Mask, and Default Gateway. UPnP: This option allows you to enable or disable UPnP mode. MAC Rendezvous: This option allows you to enable or disable MAC Rendezvous mode. - Microsoft Network Enter the name of the Workgroup that you want the print server associated with in this field. - 46 - AppleTalk Enter the AppleTalk Zone name in the box. In the following options, enter the related configuration, such as the printer type. USB1, USB2, LPT3 · Chooser Name: Display the print server's Port name. [. . . ] Network Mode: Support both Infrastructure and Ad-hoc mode. Wired Networking Network Interface: One 10/100 Fast Ethernet port (RJ-45 connector). Network Data Transfer Rate: 100Mbps. - 105 - Network Protocol Support Transport Protocols: TCP/IP, SMB, NetBEUI, and AppleTalk. TCP/IP Protocols Support: BOOTP, SNMP, Telnet, FTP, LPD, DHCP, and IPP. Hardware SDRAM: 8MB. Flash ROM: 2MB. Operating System Support - Windows 95/98/ME, Windows NT, Windows 2000/XP/2003/Vista; - NetWare 5. x (NDPS LPR remote printing); - HP-UX Unix, Sun O. S, Solaris, SCO Unix, AIX; - Unixware and Linux; - Mac OS, AppleTalk. Management Standard: SNMP MIBs: MIB-II (RFC 1213). [. . . ]