User manual TRENDNET TFC-1600

[. . . ] Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his or her own expense. CE Mark Warning This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. VCCI Warning This is a product of VCCI Class A Compliance. P/N:6012-MCR1160 TABLE OF CONTENTS PREFACE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 19" MEDIA CONVERTER CHASSIS SYSTEM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PRODUCT FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PRODUCT FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 UNPACKING AND INSTALLATION. . . . . . . . . . . . . . . . . . . . 6 UNPACKING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 DECIDING HOW TO INSTALL THE SYSTEM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 . Mounted to 19-inch standard rack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Installing Media Converter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Connecting to Power (Power Supply). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Installing and Removing the Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Plug-and-Play Houses up to Sixteen media converters Front panel LEDs for bay and fan power status Standard 19" rackmountable size, 2 Unit Height (2U) Non-stop operation & minimal downtime The following items are designed to be "hot swappable" to allow quick replacement with no downtime: - Media converters - Redundant Power supplies ??Cooling fan comes with power supply Power redundancy & power isolation One high quality internal power supply provided. Optional second power supply can be purchased for load-sharing Load sharing mechanism: If one power supply failed, the other power supply is capable of taking over immediately Media Converter Power Isolation; ensures the module bays are electrically isolated from each other 5 UNPACKING AND INSTALLATION This chapter provides unpacking and installation information for the Chassis. To avoid causing any damage to the Chassis, we recommend that you read this chapter carefully before starting installation. Unpacking When unpacking the product package, you shall find these items listed below. ??19" Media Converter Chassis System One power supply installed in the chassis One AC power cord User's Manual Accessories: rack -mount screws (8 pcs. ), rack -mount ears (2 pcs. ), rubber foot (4 pcs. ) If any item is found missing or damaged, please contact your local reseller for replacement. Installation The site where you place the chassis system may greatly affect its performance. When installing, take the following into your consideration: 6 As with any electric device, you should place the equipment where it will not be subjected to high temperatures, high humidity, or electromagnetic interference. The site you selected should meet the following requirements: The ambient temperature should be between 32 and 104 degrees Fahrenheit (0 to 40 degrees Celsius). The relative humidity should be less than 90 percent, non-condensing. Surrounding electrical devices should not exceed the electromagnetic field (RFC) standards for IEC 801-3, Level 2 (3V/M) field strength. Make sure that the equipment receives adequate ventilation at the rear. Do not block the fan exhaust holes on the rear of the chassis. The power outlet should be within 1. 8 meters of the chassis. How to Install the System We strongly suggest that you install the chassis first, as this is more convenient for you to install media converters into the chassis with ease. The accessories supplied in the product package include: rackmount screws (8 pcs. ) and rack-mount brackets (2 pcs. ). This wellbuilt chassis can be installed in the following ways: 7 . Mounting to 19-inch standard rack Use the rack-mount brackets and screws to install the chassis into any EIA 19" standard rack. Step 1: Attach the brackets to both sides of the chassis. Apply four screws to each side and secure them. Step 2: Carefully position the chassis into the rack. Align the brackets to the screw holes on the rack and use rack screws to secure the chassis on the rack. Step 3: Proceed to the "Connecting to Power" section. 8 . Installing Media Converter The chassis is equipped with sixteen media converter carriers, each of which is fitted into bays of the chassis. Step 1: To install a media converter module onto the chassis, you have to unscrew the bay cover from the desired bay first. Step 2 Unscrew the thumbscrew counter clockwise and pull the media : converter out of the carrier as shown below. Unscrew the hand screw counter clockwise by using hand or screwdriver and pull the media converter module out on the carrier Step 3: Carefully slide in the module and fasten the thumbscrew clockwise until it is fully and firmly fitted into the slot of the chassis. Insert the media converter module into an available slot and fasten the hand screw clockwise by using hand or screwdriver. 9 . Connecting to Power (Power Supply) The chassis ships with only one power supply. An optional second power supply is available. When the chassis is equipped with two power supplies, you can have the following advanced features. Hot Swappable ­ The design of the power system is based on an idea of providing maximum flexibility and redundancy. [. . . ] To remove a power supply, loosen the two thumbscrews by turning them counter clockwise and then pull out the power supply from the chassis. To install a power supply to the chassis, align the power supply's bottom plate with the guides on the chassis, slide in the power supply to the chassis, and then tighten the thumbscrews by turning them clockwise. You can slideThumbscrews in and out the power supply from the bay, fasten or loose the hand screw clockwise or counter clockwise by using hand or screwdriver. Attention! When mounting the Chassis on a sturdy flat surface, 11 attached the rubber foot on the bottom of the Chassis (one at each corner) and then place the Chassis on the flat surface. UNDERSTANDING LED INDICATORS The front panel LEDs provide instant operating status and help monitor and troubleshoot the Chassis. Front Panel There are six LED indicators that provide you with instant feedback on the status of the power supply and the fan. 1 POWERON 2 POWER FAIL FAN FAIL Power and Fan LED 1, 2 Indicate which power supply (fan) is working (depends on which slot the pow er supply is installed). Power supply online No power supply (offline) Faulty power supply Power supply works normally Faulty Fan Fan works normally Off Power Fail On (Amber) LED Off Fan Fail LED On (Amber) Off Power LED On (Green) 12 TECHNICAL SPECIFICATIONS Chassis System Capacity Material Power Cooling LED Indicators Dimensions Net Weight Sixteen bays for housing up to sixteen media converters Sheet Metal One hot-swappable power supply. *A second power supply (optional) for load-sharing/redundancy is also available. Two fans. 2 LEDs for fan status 2 LEDs for power on/off status 2 LEDs for power supply's status 415 mm × 390mm × 89 mm (W × D × H) Standard 19" size, 2 Unit Height 7. 0kg approx. [. . . ]