User manual TRENDNET TK-1604R QUICK INSTALLATION GUIDE

[. . . ] Turn OFF all computers and their peripherals, and then disconnect all power cords. 2. Connect the shared PS/2 or USB keyboard, monitor, and PS/2 or USB mouse to the KVM switch's Console Port. Connect the included AC Power Adapter to the KVM switch and then to a power outlet. Use the USB KVM cables to connect your PC to the KVM switch. To Computer 5. [. . . ] To select a specific PC port: Select PC = ScrLk + ScrLk + A + B + Y + Z Bank number Port number For example, to select port 1 on the 1st KVM switch, you execute the following key sequence: Select PC = ScrLk + ScrLk + th 0 + 1 + 0 + 1 Bank number Port number For example, to select port 10 of the 8 KVM switch on a series of daisy chained TK-1604R's you execute the following key sequence: Select PC = ScrLk + ScrLk + 0 + 8 + 1 + 0 Bank number Port number Note: When using the KVM switch standalone, type in 0 + 1 for the bank number. For a list of all the Hot-Key commands, please see the Quick Reference Sheet. 7 English Quick Reference Sheet for TK-804R/TK-1604R Hot-Keys OSD + Y Z Command A Front-panel Description ScrLk + ScrLk + B + + Select PC (AB) = bank number (YZ)= 2-digit channel number Use arrow keys to select and then hit enter --- Press Push Button for a specific port to the switch Select the active bank (switch) and channel (computer) Next lower channel (Arrow up) ScrLk + ScrLk + Use arrow keys to select and then hit enter --- Select the next lower connected channel. Only works within active bank. Next higher channel (Arrow down) ScrLk + ScrLk + Use arrow keys to select and then hit enter PgUp --- Select the next higher connected channel. Select the next lower bank when multiple switches are daisy-chained Select the next higher bank when multiple switches are daisy chained Next lower bank ScrLk + ScrLk + PgUp 8 PgDn B English ------End Next higher bank ScrLk + ScrLk + PgDn Autoscan Beep Sound On/Off --- ScrLk + ScrLk + Toggle On/Off beep during autoscan mode --Resets/reboot/initialize daisy-chain and activates password protection Reset / Initialize ScrLk + ScrLk + Load Factory Default --- F1 (Setup Page) > Load Default --- Restore the EEPROM settings to the factory default (except for password). Quick Reference Sheet for TK-804R/TK-1604R Hot-Keys OSD Front-panel Description Command Define Hotkey Sequence (default = ScrLK + ScrLk) ----- F1 (Setup Page) > Hotkey Use left and right arrows to select (Scroll Lock, Caps Lock, Esc, F12 or Num Lock) --- Select the hotkey preceding sequence among 5 alternative keys Change PC Name --- --- Use arrow keys to select, then hit Insert to edit --- Change the PC Name Show OSD Menu ScrLk + ScrLk + Space Bar Activates OSD menu 9 + ScrLk + S English ----F1 (Setup Page) > Autoscan period. Use left and right arrows to select Press any button or key ----F1 (Setup Page) > Auto Logout. Use left and right arrows to select --- Autoscan ScrLk Press any push button Autoscan through every connected channel for quick browsing of each channel Specify a delay within a range of 5~95 seconds Autoscan with Programmable Delay Time Stop Autoscan Press any key on keyboard Press any button or key End Autoscan activity Auto Logout Timeout Enable/ Disable (0-99 min) Specify the time out for auto logout ­ screen/keyboard/ mouse locked after timeout period for security (default/disable = 0) Quick Reference Sheet for TK-804R/TK-1604R Hot-Keys OSD Front-panel Description Command OSD Menu Timeout (0~95 seconds) --F1 (Setup Page) > OSD Timeout ------- Specify the timeout for OSD menu [default = 60 seconds; 0 = disable] Enable/disable the OSD Title Bar [default = ON] OSD Title Bar On/Off ScrLk + ScrLk + T OSD Title Bar Position (Left/Right) ----- F1 (Setup Page) > Title Bar. Use left and right arrows to select. Select the OSD title bar position on your screen 10 --F1 (Setup Page) > Setup Password ----F1 (Setup Page) > Upgrade Firmware --- English Setup Password (Disable/Enable) Enable/disable password protection [default == disable; password length <= 8 characters] Upgrade Firmware Upgrade firmware. See firmware release notes for more details. Note: 1. If you have defined a different hotkey preceding sequence key (e. g. Caps Lock, Esc, F12), press that button instead of scroll lock. For example, if you want to turn off beep and have defined the hotkey preceding sequence key as F12, press F12 + F12 + B. OSD Menu control is only available when the OSD menu is activated. To activate the OSD menu, use the hotkey sequence ScrLk ScrLk Space Bar. When the OSD Menu is active, the mouse will be locked until you exit the OSD Menu. Technical Specifications Management: TK-804R: 8 computers TK-1604R: 16 computers 1 x USB keyboard Type A 1 x USB mouse Type A 1 x PS/2 keyboard 6-pin mini din female 1 x PS/2 mouse 6-pin mini din female 1 x VGA HDB 15-pin female 1 x VGA HDB 15-pin male (Daisy-Chain IN) 1 x VGA HDB 15-pin female (Daisy-Chain OUT) TK-803R: 8 x VGA HDB 15-pin TK-1603R: 16 x VGA HDB 15-pin 2048 x 1536 8 Levels TK-804R: 64 Computers TK-1604R: 128 Computers Push Button, OSD and Hot-Key Commands Per Port : PC Link (Green) ; PC Active (Red) Saved and restored 10 ~ 100 seconds PS/2 Interface Power USB Interface Power External AC Power Adapter : 9V DC, 1A 1RU 407 x 164 x 45 mm (16 x 6. 5 x 1. 8 in) TK-803R : 1. 70 kg (4. 15 lbs) TK-1603R : 2. 06 kg (4. 55 lbs) 0ºC ~ 40ºC (32ºF ~104ºF) -20ºC ~ 60ºC (-4ºF ~ 140ºF) 0%~90%, Non-Condensing FCC and CE Console Port Connectors: Daisy-Chain Port Connectors: PC Port Connectors: (all female) VGA Resolution: Daisy-Chain Levels: Maximum Number of PC Connections: Port Selection: LED Segment: Keyboard State: Auto-Scan Intervals: Power: Size (19" Rack mount): Dimensions: Weight: Operating Temperature: Storage Temperature: Humidity: Certifications: 11 Troubleshooting Q1: Do I need to use the included external AC adapter?A1: It is recommended that you use the included external AC adapter with the TK-804R/TK-1604R KVM switch. Q2: I have the KVM switch connected properly, but my keyboard and mouse don't work. A2: First, make sure the power adapter is plugged into your KVM switch. Second, make sure your PS/2/USB ports are working properly by connecting your mouse and keyboard directly to the PS/2 or USB port computer. Third, once you confirm that the PS/2 or USB ports are functional, please reboot your computers, and try to use the KVM switch again. Fourth, if your computer is running Windows 98SE, you may need to download and install the USB hot fix. Please go to this link for download and installation instructions: http://support. microsoft. com/kb/q240075. Once the hot fix is installed, follow the installation instructions in Section 2. [. . . ] Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Check with you Local Authority or Retailer for recycling advice. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. ADVERTENCIA En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de alimentacón necesario para su funcionamiento. [. . . ]