User manual TRENDNET TK-208K

[. . . ] How to Install Note: The TK-205 PS/2 KVM Switch does not require any drivers or software. Turn OFF all computers and their peripherals, and then disconnect all power cords. 2. Connect the shared keyboard, monitor, and mouse to the KVM switch's Console Port. 3. Use the KVM cables to connect each computer to the KVM switch. 4. [. . . ] Use the KVM cables to connect each computer to the KVM switch. 4. Turn ON the connected computers one-by-one and wait until each computer's desktop appears. Your installation is now complete. 2 English 3. Operation Note: To switch between computers, you can use the front-panel push buttons or the "Hot-Key" commands. 3. 1 The Push Buttons Press the corresponding push buttons to select your PC. 3. 2 Hot-Key Commands A keyboard hot-key command consists of three keystrokes: Hot-Key command = ScrLk + ScrLk + Command key(s) After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again. You then have another 2 seconds to press a command key. If you do not press a key within 2 seconds, the switch will exit hot-key mode. Quick Reference Sheet for TK-205 Command ScrLk Select PC Hot-Keys + ScrLk + X Description Select the active PC channel. (x is a top-row number key) x = 1 ~ 2 for PC channel number Next higher PC channel Next lower PC channel Autoscan Stop Autoscan ScrLk ScrLk ScrLk + ScrLk + + ScrLk + + ScrLk + S (Arrow up) Select the next higher connected PC channel. Select the next lower connected PC channel. Autoscan through every channel for quick screen browsing of each channel. Terminate Autoscan activity. (Arrow down) Press any key on keyboard Hot-Key Convention: The hotkey notation ScrLk + ScrLk + (key) , denotes that you should hit the individual key consecutively one at a time, not simultaneously. 3 English Specifications Computer Connections KVM Cable 2 2 Sets of 1. 2M (4ft) KVM Cables To Console: 1 x VGA/SVGA HDB 15-pin Cable Interface (all male) To PC: 1 x PS/2 Mouse 6-pin Mini Din 1 x PS/2 Keyboard 6-pin Mini Din 1 x VGA/SVGA HDB 15-pin Mouse: PS/2 6-pin Mini Din Keyboard: PS/2 6-pin Mini Din Monitor: VGA/SVGA HDB 15-pin Push Button or Hot-Key Commands 10 seconds Saved and restored Bus-Powered 95 x 65 x 30 mm (3. 7 x 2. 6 x 1. 2 in. ) 85g (3oz) 0º ~ 40ºC (32º ~104º F) -20º ~ 60ºC (-4º ~ 140º F) 0%~80%, Non-Condensing CE, FCC Console Connectors (all female) Port Selection Auto-Scan Interval Keyboard State Power Supply Dimensions Weight Operating Temperature Storage Temperature Humidity Certifications 4 Troubleshooting Q1: Where is the AC adapter?TK-208K - 2 Year Warranty If a product does not operate as warranted above during the applicable warranty period, TRENDnet shall, at its option and expense, repair the defective product or part, deliver to customer an equivalent product or part to replace the defective item, or refund to customer the purchase price paid for the defective product. All products that are replaced will become the property of TRENDnet. Replacement products may be new or reconditioned. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual. Warranty service may be obtained by contacting TRENDnet office within the applicable warranty period for a Return Material Authorization (RMA) number, accompanied by a copy of the dated proof of the purchase. Products returned to TRENDnet must be pre-authorized by TRENDnet with RMA number marked on the outside of the package, and sent prepaid, insured and packaged appropriately for safe shipment. 6 WARRANTIES EXCLUSIVE: IF THE TRENDnet PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDnet'S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. [. . . ] Warranty service may be obtained by contacting TRENDnet office within the applicable warranty period for a Return Material Authorization (RMA) number, accompanied by a copy of the dated proof of the purchase. Products returned to TRENDnet must be pre-authorized by TRENDnet with RMA number marked on the outside of the package, and sent prepaid, insured and packaged appropriately for safe shipment. 6 WARRANTIES EXCLUSIVE: IF THE TRENDnet PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDnet'S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDnet NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDnet'S PRODUCTS. [. . . ]