User manual TRENDNET TK-423K QUICK INSTALLATION GUIDE

[. . . ] Connect the shared PS/2 or USB keyboard, monitor, PS/2 or USB mouse, speakers (optional) and microphone (optional) to the KVM switch's Console Port. Connecting to USB Computer To KVM 3. Use the KVM cables to connect your PC to the KVM Switch. Note: Do not connect the PS/2 keyboard cable to your computer. To Computer via USB 2 English Connecting to PS/2 Computer 4. Connect the USB to PS/2 mouse adapter to the USB connector. 5. [. . . ] Caps Lock, Esc, F12), press that button instead of scroll lock. For example, if you want to turn off activate autoscan and have defined the hotkey preceding sequence key as F12, press F12 + F12 + S. 5 English Specifications Management: 4 computers 1 x USB keyboard Type A 1 x USB mouse Type A 1 x PS/2 keyboard 6-pin mini din female 1 x PS/2 mouse 6-pin mini din female 1 x VGA HDB 15-pin female 1 x 3. 5mm audio in/out jack 1 x 3. 5mm microphone in/out jack 4 x VGA HDB 15-pin female 4 x 3. 5mm audio in/out jack 4 x 3. 5mm microphone in/out jack 2048 x 1536 Push Button and Hot-Key Commands Per Port : PC Active (Green) Saved and restored 10 ~ 100 seconds External AC Power Adapter : 5V DC, 2. 5A 255 x 117. 5 x 45 mm 935g (2. 07lbs) Operating: 0° ~ 40° C (32° ~ 104° F) 0%~90%, Non-Condensing FCC and CE Console Port Connectors: PC Port Connectors: VGA Resolution: Port Selection: LED Segment: Keyboard State: Auto-Scan Intervals: Power: Dimensions: Weight: Temperature: Humidity: Certifications: 6 Troubleshooting Q1: Do I need to use the included external AC adapter?A1: You must use the included external AC adapter with the TK-423 KVM switch. Q2: I have the KVM switch connected properly, but my keyboard and mouse don't work. A2: First, make sure the power adapter is plugged into your KVM switch. Second, make sure your PS/2/USB ports are working properly by connecting your mouse and keyboard directly to the PS/2 or USB port computer. Third, once you confirm that the PS/2 or USB ports are functional, please reboot your computers, and try to use the KVM switch again. Fourth, if your computer is running Windows 98SE, you may need to download and install the USB hot fix. Please go to this link for download and installation instructions: http://support. microsoft. com/kb/q240075. Once the hot fix is installed, follow the installation instructions in Section 2. Q3: Can I connect or disconnect the KVM cables while the computers are turned on?A3: Yes, you can connect or disconnect the KVM cables while the computers are turned on, because the interface is Hot-Pluggable. Q4: Will the KVM switch restore the keyboard settings between computers?A4: Yes, the KVM switch will restore the keyboard settings when switching between computers. (i. e. : Caps Lock, Num Lock, etc. ) Q5: How do I switch from one computer to another with the KVM switch?A5: You can switch computers by pressing the Push Buttons on the KVM switch or using the Hot Key commands. Go to Section 3 Operation for more information. If you still encounter problems or have any questions regarding the TK-423K, please contact Trendnet's Technical Support Department. 7 Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TK-423 - 2-Year Warranty If a product does not operate as warranted above during the applicable warranty period, TRENDnet shall, at its option and expense, repair the defective product or part, deliver to customer an equivalent product or part to replace the defective item, or refund to customer the purchase price paid for the defective product. All products that are replaced will become the property of TRENDnet. Replacement products may be new or reconditioned. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Check with you Local Authority or Retailer for recycling advice. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. [. . . ]