User manual TRENDNET TK-800R

[. . . ] Keyboard status restored when switching PCs ??Bank and Port Number LED Display for easy monitoring ??Buzzer sound for switching port confirmation. Using Standard Keyboard, VGA, and Mouse cables. [. . . ] The Switch will beep once, the LED display shows -- -- --, the Switch then beeps again, and the LED display shows 1 01. If the "Computer 1" port is not connected to a live PC, the "Port No. " LED will keep flashing, push the "Port Select" button to select the next available PC. After resetting the Switch, you will need to enter the password to login the console. When the Switches are daisy-chain together, resetting the Master Switch is the same procedure as described above. To reset the Slave Switch, press the Slave Switch's Bank Select and Port Select buttons at the same time and then release the buttons, the LED display shows -- -- --, with the "Port No. " LED (-- --) flashing. After that, reset Master Switch, the Bank Selection will switch to the Master Switch (Bank 1), and you can enter the password to login the console. Keyboard Hot-Key Commands: You can also conveniently command KVM Switch through simple key sequences. To send commands to KVM Switch, the "SCROLL LOCK" key must be pressed twice within 2 seconds. You will hear a beep, confirming that the keyboard is in hot -key mode. If you did not press any command key within 2 seconds after entering the hot-key mode, the keyboard will return to regular Operation System Control mode. Hot-Key Commands: within 2 seconds Scroll Lock Scroll Lock ? ? Previous Channel (Port) 7 Scroll Lock ? Scroll Lock ? Next Channel (Port) Note: You can also press the "up arrow key" or "down arrow key" again within 2 seconds from the last stroke command to select the next or previous port. Scroll Lock ? Scroll Lock ? Page Up Previous Bank Scroll Lock ? Scroll Lock ? Page Down Next Bank To select PC Port in Dais y-Chain Configuration: Scroll Lock ?= 01 ~ 04 (TK-400R) 01 ~ 08 (TK -800R) 01 ~ 16 (TK-1600R) Note: Please use the number keys above the letter keys on the keyboard to enter the bank and port numbers. Scroll Lock Scroll Lock ? ? B Beep Sound Off / On (for auto-scan mode only) Note: The default is Beep Sound On Scroll Lock ? Scroll Lock ? S Auto Scan Mode Note: In Auto Scan Mode, the Switch will automatically scan from one computer to the other. SCAN: 1 0 SEC. 0 ¤ SYSTEM 02 0 ¤ SYSTEM 04 0 SYSTEM 06 0 ¤ SYSTEM 08 1 SYSTEM 10 1 ¤ SYSTEM 12 1 ¤ SYSTEM 14 1 SYSTEM 16 CHANGE PASSWORD CONSOLE ON/OFF a. The 1 ST line is Bank No. , press "Page Up" or "Page Down" key to select the "Bank" (Switch). The 2 nd line is the PC Name list (the number on the left is Port Number). You will find the Port Number listed from 01 to 16 depends on how many ports are on the KVM Switch. You can define your own PC Name (maximum 10 characters), please see instructions below. The factory default PC Name for each port is SYSTEM ##, where ## is the Port Number. The sun symbol " ESC : QUIT TAB : NEXT INSERT :EDIT ?: SELECT PORT PgDn/PgUp: BANK SELECT ¤ " on the left of the PC Name means this PC is online. 9 Use up arrow key " ?" to select the destination PC Name. You will see a hand on the selected Computer Name's right hand side, pointing to the selected computer name. After you have selected the desired PC Port, you can press the ENTER Key to switch to the selected PC Port. After finding the PC that you are looking for, hit "Esc" key to cancel the OSD operation. Use " PgUp " key or " PgDn" key for selecting previous or next Bank Number (Switch Number). Changing Computer Name BANK : 1 01 SYSTEM 01 02 ¤ SYS¦ EM 02 ? After selecting the desired PC Name, press " INS" key to edit PC name. [. . . ] Make sure the mouse is a true PS/2 mouse. A combo mouse will work, as long as it is set to PS/2 mode and the correct adapter was used. Avoid moving the mouse or pressing the mouse's buttons when switching from port to port. ??Avoid switching ports when the PC is shutting down. [. . . ]