User manual TRENDNET TK-V200S

[. . . ] Align the bracket to the screw holes on the rack, then use the screws provided with the equipment rack to mount the KVM switch. Your installation is now complete. Register Your Product To ensure the highest level of customer service and support, please take a moment to register your product Online at: www. trendnet. com/register Thank you for choosing TRENDnet. 3 3. Operation Note: To switch between computers, you can use the front-panel push buttons or the Hot Key commands. LED Indicators Red LED light: KVM cable is connected and PC is powering the KVM switch. Green LED light: Indicates the selected PC port is active, whether the computer is turned on or off. [. . . ] Green LED flash: The selected PC port is in scan mode or is not powered by the PC DEUTSCH FRANAIS Push Buttons Press the push buttons to switch between computers. 4 ESPAOL ENGLISH ENGLISH FRANAIS Hot Key Commands A keyboard hot key command consists of three keystrokes: Hot Key command = Scroll Lock + Scroll Lock + Command key(s) After pressing the Scroll Lock key, you have 2 seconds to press the Scroll Lock key again. You then have another 2 seconds to press a command key. A beep confirms that the KVM switch is in "Hot Key" mode. If you do not press a key within 2 seconds, the switch will exit hot key mode. To select a specific PC port: For TK-401R DEUTSCH Y = Port number 1-4 Scroll Lock + Scroll Lock + Y For example, to Select Port 1 on the KVM switch you hit the following key sequence Scroll Lock + Scroll Lock + 1 For TK-801R/TK-V200S ESPAOL Scroll Lock + Scroll Lock + Y + Z Y Z = Port number 01-08 (TK-801R) or Port number 01-16 (TK-160R) For example, to select Port 1 or Port 10 on the KVM Switch, you hit the following key sequence Select Port 1 = Select Port 10 = Scroll Lock + Scroll Lock + 0 + 1 Scroll Lock + Scroll Lock + 1 + 0 For a list of all the Hot Key commands, please see the Quick Reference Sheet. 5 Quick Reference Sheet for TK-401R/801R/1601R Command TK-401R Hot Keys Front-Panel Buttons Description Scroll Lock + Scroll Lock + Y (Y)= 1-digit port number (1-4) Select PC TK-801R/TK-V200S Press the Push Button for a specific port to switch to that port Select the active PC channel (YZ)= 2-digit port number (01-16) Next lower channel Scroll Lock + Scroll Lock + --- Select the next lower PC channel Next higher channel Scroll Lock + Scroll Lock + --- Select the next higher PC channel Toggle On/Off beep sound during Autoscan mode Reset KVM Autoscan through every connected channel for quick screen browsing of each channel Autoscan through every connected channel for quick screen browsing of each channel in intervals of X seconds Terminate Autoscan activity Scroll Lock + Scroll Lock + B --- Reset KVM Scroll Lock + Scroll Lock + END --- Autoscan Scroll Lock + Scroll Lock + S --- Autoscan with Programmable Delay Time Scroll Lock + Scroll Lock + S + X (X)= 5~99 Seconds --- Stop Autoscan Press any key on keyboard Press any button. 6 ESPAOL DEUTSCH Autoscan Beep Sound On/Off FRANAIS Scroll Lock + Scroll Lock + Y + Z ENGLISH Technical Specifications TK-401R: 4 computers TK-801R: 8 computers TK-V200S: 16 computers 1 x PS/2 keyboard 6-pin mini din 1 x PS/2 mouse 6-pin mini din 1 x VGA HDB15 15-pin 4/8/16 x PS/2 keyboard 6-pin mini din 4/8/16 x PS/2 mouse 6-pin mini din 4/8/16 x VGA HDB15 15-pin 1920 x 1440 Push Button and Hot Key Commands Link (Green), Active (Red) Save and restore 5 ~ 99 seconds PS/2 Interface Power External AC Power Adapter : 9V DC, 1A (TK-801/TK1601 only) TK-401R: 202 x 104 x 45mm (8. 0 x 4. 1 x 1. 8 in. ) TK-801R: 407 x 165 x 45mm (16. 0 x 6. 5 x 1. 8in. ) TK-V200S: 406 x 165 x 85 mm (16. 0 x 6. 5 x 3. 4 in. ) TK-401R: 835g (1. 84lb. ) TK-801R: 1. 9 kg (4. 2 lbs) TK-V200S: 2. 65 kg (5. 85 lbs) Operating: 0 ~ 40 C (32 ~ 104 F) Storage: -20 ~ 60 C (-4 ~ 140 F) 0% ~ 90% Non-Condensing CE and FCC Management Console Port Connectors (all famale) PC Port Connectors (all female) VGA Resolution Port Selection LED Keyboard State Auto-Scan Intervals Power Dimensions Weight Temperature Humidity Certifications 7 Troubleshooting Do I need to use the included external AC adapter?It is recommended that you use the included external AC adapter with the TK-801R/ TK-V200S KVM switch. I have the KVM switch connected properly, but my keyboard and mouse don't work. Please make sure your PS/2 ports are working properly by testing it with another mouse or keyboard. Once you confirm that the PS/2 ports are functional, please reboot your computers, and try to use the KVM switch again. Can I connect or disconnect the KVM cables while the computers are turned on?Yes, you can connect or disconnect the KVM cables while the computers are turned on, because the interface is Hot-Pluggable. Customers shipping from outside of the USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA are responsible for custom charges, including but not limited to, duty, tax, and other fees. 9 WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDNET'S OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDNET'S PRODUCTS. TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDNET'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. Governing Law: This Limited Warranty shall be governed by the laws of the state of California. Some TRENDnet products include software code written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). Go to http://www. trendnet. com/gpl or http://www. trendnet. com Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. [. . . ] Go to http://www. trendnet. com/gpl or http://www. trendnet. com Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. Please go to http://www. gnu. org/licenses/gpl. txt or http://www. gnu. org/licenses/lgpl. txt for specific terms of each license. [. . . ]