User manual TRENDNET TL2-E284

[. . . ] Table of Contents CHAPTER 1 PREFACE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 ABOUT THIS GUIDE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 TERMS/USAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 CHAPTER 2 PRODUCT INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Matching packets with specific DSCP type. Matching packets with specific ToS value. The possible value is 0-7 Matching packets with a specific TCP acknowledge flag. The options are: Establish ­ TCK ACK packet. Any - Any kind of TCP acknowledge packet. Matching packets with a specific TCP reset flag. The options are: Set - TSP reset packet. Matching packets with a specific L4 source port. Matching packet with a range of source port. For example source port 23 with mask FFFE means 22~23. The mask options are: 8000, C000, E000, F000, F800, FC00, FE00, FF00, FF80, FFC0, FFE0, FFF0, FFF8, FFFC, FFFE, FFFF. Matching packets with a specific L4 destination port. Matching packet with a range of destination port. For example source port 23 with mask FFFE means 22~23. The mask options are: 8000, C000, E000, F000, F800, FC00, FE00, FF00, FF80, FFC0, FFE0, FFF0, FFF8, FFFC, FFFE, FFFF. Message Code Message Type Dscp TOS ACK Bit RST Bit Source Port Source Port Mask Destination Port Destination Port Mask Click Apply to submit the changes to the ACL rule, Delete to delete it. Classmap Settings This page is to create/configure a Classmap. 7-5 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Figure 70 ­ ACL > Classmap Parameter Classmap ID ACL ID ACL Type Description Specify the classmap ID. Specify the type of the ACL rule. Click Add to create a new classmap, Reset to clear the value. Parameter Select Classmap ID ACL ID ACL Type Description Select a classmap to delete The classmap ID. The type of binding ACL rule. Click Delete to delete selected classmap. Policymap Settings This page is to create/configure a policymap. Figure 71 ­ ACL > Pokicymap Parameter Policy Map ID Classmap ID Traffic Rate In-Profile Action 7-6 Description Specify the policymap ID. Set the traffic rate threshold in Kbps for the class map. Specify the action to packets do not exceed the rate threshold. The options are: 24-Port 10/100Mbps Layer 2 Switch w/ 4 Gigabit Ports and 2 Shared Mini-GBIC Slots Policed-DSCP - Assign a new DSCP value to the packets. Policed-Priority - Assign a new 802. 1p priority to the packets. [. . . ] Please contact the point-of-purchase for their return policies. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. [. . . ]