User manual TRENDNET TPE-224WS

[. . . ] FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and radiates radio frequency energy. If not installed and used in accordance with instructions in this User's Guide, it may cause harmful interference to radio communications. [. . . ] The default password is "admin". Figure 9. Configuration Setting Password Change: This option allows you to change the password, Enter the original password, the new password, confirm the new password and click "Set". 22 Figure 10. Password Change Firmware Upgrade: When the device has a new function, there will be a new firmware to update the device, use this function to update. Select the path of where the firmware updated firmware is located by clicking "Browse". Once you have selected the firmware, type the password of the device Figure 11. Firmware Upgrade Web Configuration: Double click the device in the Monitor List or select a device in the Monitor List and click "Access Web" to access the Switch's browser configuration. DHCP Refresh: Click "DHCP Refresh" to refresh the IP address of selected device form DHCP server. Toolbar The toolbar in the utility has menu options; File, View, Options and Help. 23 There are four options under "File"; Monitor Save, Monitor Save As, Monitor Load and Exit. Monitor Save: To record the setting of the Monitor List to the default. The next time you open the utility, it will auto load the default recorded setting. Monitor Save As: To record the setting of the Monitor List with a specific filename and file path. Monitor Load: To manually load the setting file of the Monitor List. There are four options under "View"; view log and clear log function. View Log: Displays switch and utility activities. There is one option under "Option"; Refresh Time. This option allows the user to set the time for monitoring the device. Choose 15 secs, 30 secs, 1 min, 2 min and 5 min. There is one option under "Help"; About, About displays the version of the utility. 24 Configuring the Switch The TPE-224WS 28-Port 10/100/1000Mbps Gigabit Ethernet Web Smart PoE Switch has a Web GUI interface for smart switch configuration. The Switch can be configured through the Web Browser. A network administrator can manage, control and monitor the switch from the local LAN. This section indicates how to configure the Switch to enable its smart functions Login Before you configure this device, make sure your computer is on the same subnet as the Web Smart PoE Switch. For example, since the default IP address of the Web Smart PoE Switch is 192. 168. 0. 1, then the computer should be set at 192. 168. 0. x (where x is a number between 2 and 253), and the default subnet mask is set to 255. 255. 255. 0. Open Internet Explorer 5. 0 or above Web browser. [. . . ] Once you need to backup the current firmware of the Switch, press the "Backup" button to save the current firmware of the Switch; To restore or upgrade firmware to the Switch, you must specify the firmware file and press "Upload" button to proceed the firmware upload. Figure 42. Firmware Upload System Reboot Provides to a safe way to reboot the system and ensure the configuration has been saved, or all the changes you just made may be lost after system reboot. Figure 43. System Reboot 65 Logout When pressed you will logout of the web configuration page and return back to the first Login page. Figure 44. 66 TECHNICAL SPECIFICATIONS General Standards IEEE 802. 3 10BASET Ethernet IEEE 802. 3u 100BASETX Fast Ethernet IEEE 802. 3ab 1000BASET Gigabit Ethernet IEEE 802. 3z 1000BASESX/LX Gigabit Ethernet IEEE 802. 3af Power over Ethernet CSMA/CD Ethernet: 10Mbps (halfduplex), 20Mbps (fullduplex) Fast Ethernet: 100Mbps (halfduplex), 200Mbps (fullduplex) Gigabit Ethernet: 2000Mbps (fullduplex) Star 10BASET: UTP Cat. 3, 4, 5; up to 100m 100BASETX: UTP Cat. [. . . ]