User manual TRENDNET TPE-S160 QUICK INSTALLATION GUIDE

[. . . ] Verify that the following TPE-S160 LED are on: Power, PoE and Link/ACT. 4 Using a non-PoE device with the TPE-S160 and the TPE-112GS (PoE Splitter) Note: Take note of the power requirements for your non-PoE device. The TPE-112GS only supports non-PoE devices with an output power of 5V, 7. 5V, 9V or 12V DC. 1. Select the voltage (5V, 7. 5V, 9V or 12V) on the TPE-112GS that is required for your non-PoE device. 2. Connect an Ethernet cable from a port (1~16) on the TPE-S160 switch to the PoE IN port on the TPE-112GS. 3. [. . . ] Verify that you have file sharing enabled. Please contact your Operating System support for more information. After I connect my PCs to the Switch, I can only get onto the Internet from one computer. The Switch was not designed to share Internet between multiple computers. You need to get an Internet router such as the TW100-S4W1CA. My 802. 3af Powered device does not power on when I plug the device into the Switch. Verify that the PoE device supports IEEE 802. 3af protocol. Verify that the power switch is set to the on position. Move the power switch to the off position. Wait 15 seconds, then move the power switch back to the on position. Plug the device into a different port on the PoE switch. Where is the uplink port located on the Switch?Since all the ports on the Switch are Auto-MDIX, any of the ports can be used as an uplink port. If you still encounter problems or have any questions regarding the TPE-S160 please contact Trendnet's Technical Support Department. 8 Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TPE-S160 ­ 3 Years Limited Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry a 1 year warranty. If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit's warranty continues from the original date of purchase. All products that are replaced become the property of TRENDnet. Replacement products may be new or reconditioned. TRENDnet does not issue refunds or credit. Please contact the point-of-purchase for their return policies. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. [. . . ] LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDNET'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. Governing Law: This Limited Warranty shall be governed by the laws of the state of California. Some TRENDnet products include software code written by third party developers. [. . . ]