User manual TRENDNET TPL-303E

[. . . ] Table of Contents 1 Table of Contents Chapter 1 Installing the 200Mbps Powerline AV Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Status Lights and Label Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This is not the network password, but you are required to enter it if you are setting the network password with another Powerline adapter device. To install the Powerline Encryption Utility, follow these steps: 1. Insert the TPL303E / TPL303E2KResource CD into a CD drive on the computer that is connected to your router. If the CD does not start automatically: -- Go to My Computer on the Windows Start menu, and doubleclick the drive that contains the TPL303E / TPL303E2K CD or -- Select the CD drive and click on the Autorun. exe executable file. All devices on a Powerline network can be managed from one computer. If you add another TPL303E device to an existing Powerline network, you can install the Powerline encryption utility on the computer connected locally to the new TPL303E device or on the computer originally used to set up the Powerline network password. You can use any computer to manage the network, but this procedure assumes that you are working from the computer that is connected to your router. Chapter 1 Installing the 200Mbps Powerline AV Adapter 6 2. Click Install Utility to start the installation Prior to the utility installation, it will prompt you to install the WinPcap program. Chapter 1 Installing the 200Mbps Powerline AV Adapter 7 3. Then the powerline utility installation will start, click Next to continue 4. Click Next and follow the instructions on the screen. Chapter 1 Installing the 200Mbps Powerline AV Adapter 8 5. The InstallShield Wizard indicates that the installation is complete. Chapter 1 Installing the 200Mbps Powerline AV Adapter 9 Set Your Private Network Name The fastest and most reliable way to set the network name is to set the password for all devices at once. To do this, you need the device password on the back label of each Powerline device. There are two steps to setting the network name: first enter the device password for each remote Powerline device, and then set the network name. Enter the device password for each remote Powerline device: a. Make sure that all Powerline devices are plugged into 100~240V AC wall sockets. Start the Powerline encryption utility Note: Accessing the utility for the first time, you might receive the following warning message, please connect OK to continue. Chapter 1 Installing the 200Mbps Powerline AV Adapter 10 c. e. Check that the utility lists all the remote Powerline devices. Select a Powerline device and, if more than one remote device is listed, identify it from the MAC address. Enter the password recorded from the label on the back of the selected Powerline device. Repeat this step for all devices that you want attached to your network. Chapter 1 Installing the 200Mbps Powerline AV Adapter 11 2. Set the Private Network Name i. [. . . ] There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the product was subject to conditions more severe than those specified in the manual. Warranty service may be obtained by contacting TRENDnet within the applicable warranty period and providing a copy of the dated proof of the purchase. [. . . ]