User manual TRENDNET TPL-407E

[. . . ] airports, hospitals, chemical/oil/gas industrial plants, private buildings etc. ) is not clear, please ask for authorization to use these devices prior to operating the equipment. Regulatory Information/disclaimers The installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the Manufacturer may void the user's authority to operate the equipment. The Manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device. The Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from the failure to comply with these guidelines. USA-FCC (Federal Communications Commission) statement This device complies with Part 15 of FCC Rules. [. . . ] Antenna Detachable 2 dBi Gain Antenna for wireless connection. Reset Button Use a pin-shape item to push to reset this device to factory default settings. It will be useful too when the manager forgot the password to login, but the setting will be back to default setting. LED Indicators Power: This LED lights green when the switch is receiving power. HomePlug: This LED will blink when there is HomePlug activity. Wireless: This LED will blink when there is wireless LAN activity. 3 Connecting to the 85Mbps Powerline Wireless Access Point 1. Plug the 85Mbps Powerline Wireless Access Point into an available power outlet. Setup your WLAN Card with the following parameters: SSID: Powerline Channel: 6 Security: disable 4 PC NETWORK TCP/IP SETTING The network TCP/IP settings differ based on the computer's operating system (Win95/98/ME/NT/2000/XP) and are as follows. Windows 95/98/ME 1. Click on the "Network neighborhood" icon found on the desktop. Click the right mouse button and a context menu will be shown. Select "Properties" to enter the TCP/IP setting screen. Select "Obtain an IP address automatically" on the "IP address" field. Figure 1. DHCP Server End IP: Enter an IP address to serve as the ending IP address that the DHCP server will use to assign IP addresses to all LAN devices connected to the 85Mbps Powerline Wireless Access Point. Lease Time: The lease time specifies the amount of time a network user is allowed for their current dynamic IP address. Dynamic DHCP List: All dynamic DHCP client computers are listed in the table. The following information is shown for each DHCP client computer: Host name, IP address, MAC address and Expired Time. 11 Wireless setting This section enables users to configure wireless settings for the 85Mbps Powerline Wireless Access Point. Basic This page allows users to enable and disable the wireless LAN function, create a SSID, and select the channel for wireless communications. Figure 12. Wireless: Enables or disables the wireless LAN setting of the 85Mbps Powerline Wireless Access Point. The SSID of any wireless device must match the SSID configured in the 85Mbps Powerline Wireless Access Point. SSID Broadcast: When SSID Broadcast is enabled, all wireless clients will be able to view the 85Mbps Powerline Wireless Access Point's SSID. Channel: Select a transmission channel for wireless communications. The default channel is 6. 12 Security This setting enables users to set authentication type for secure wireless communications. Open System allows public access to the 85Mbps Powerline Wireless Access Point via wireless communications. Shared Key requires the user to set a WEP key to exchange data with other wireless clients that have the same WEP key. [. . . ] Then, click "Next" to continue. Figure 31. Setup Wizard ­ Set Wireless LAN Connection 24 Step 3: Set Wireless Encryption If user wants to enable WEP, please click "Enabled". Then, select the key size of WEP encryption and enter the Key value in the Key text box. Please click "Next" to continue. Figure 32. [. . . ]