User manual TRENDNET TV-IP100W

[. . . ] TABLE OF CONTENTS ABOUT THIS GUIDE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 FEATURES AND BENEFITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 UNPACKING THE PACKAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 SYSTEM REQUIREMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PHYSICAL DESCRIPTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2. HARDWARE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 ATTACHING THE CAMERA TO THE STAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 CONNECTING THE ETHERNET CABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 ATTACHING THE POWER SUPPLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3. SECURITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4. [. . . ] If the User Name and Password is entered incorrectly, the camera will not be added into IPView SE. Note : You are allowed to add only one camera at a time. When the user adds the camera, four icons will appear, including: "Assign IP to Camera", "Connect/Disconnect", "Erase", "Extra Information". The above dialog box will appear only if administrator has already set up the User Name and Password in the Web Configuration setting. If you forget to highlight the camera you want to add, a dialog box will appear to notify you of the error. Camera Config Assign IP to Camera Connect / Disconnect Erase Motion record Schedule record Manual record Extra Information Make sure to save any changes you have made to keep the information updated. 60 61 How to Change Camera Assign IP of New Camera To change camera, click the "Assign IP of Camera" button. An Assign IP of Camera dialog box will appear as illustrated below. Connect/Disconnect the Image Connect the Image Click the "Connect/Disconnect" button and the preview screen will appear with the video image. You must select the camera and click the Add button to add a new camera. NOTE: When a new camera is added, it is connected. If you click the "Connect/ Disconnect" button, it will be in disconnecting, also, no image showed. Minimize Click to minimize the display screen of the camera. 62 63 Maximize Click to maximize the display screen of the camera. Close Click to close the display screen of the camera. Always on top Click to have the display screen always appear on the top of the window. Disconnect the Image Click the "Connect/Disconnect" button, and the camera will be disconnected. Wake up control panel Click to open the control panel again when it is closed. Color setting Click to adjust color of the image. View list Click to check the event list of the camera. Snapshot Click to snapshot a picture from the camera. Rotate image Click to rotate the image of the camera. 64 65 How to Delete a Camera Erase Camera To delete a camera, you must select the camera to delete from the IPView SE control panel. Then, click the "Erase Camera" button. After deleting the camera, the IPView SE control panel will appear as below. Extra Information Extra Information The screen displays the camera's information. 66 67 How to Adjust the Property Setting System Configure From the control panel, select the button and the dialog box will appear as shown below. 3. Storage List This option is used to define the path to save image files. The software will create a camera name folder as the "Storage List" which is allowed to create up to 16 File Path. Recycle: When you enabled this function, it will recycle the HDD space once the disk space is less than the size defined. The size defined can be from 200 MB to 50000 MB. Proxy Server: Select this option to enable the Proxy Server support. Camera Scan Delay: It allows you to display for each camera one by one. The time interval for each camera can be from 1 Sec. Single HDD Reserve Space This option permits reserved HDD space from 500 MB to 1000 MB. Split Recording File From this option, you can adjust the file size for recording the video images (the default setting is 10MB). If the recorded video files reach the file size, video images will be recorded into another file automatically. By File Size - permits recording by file size from 10 MB to 50 MB. 68 69 Camera Configure Click the "Camera Config" button and it will active the Camera Setting, Motion Setting and Update Firmware buttons. Motion Setting You can adjust the sensitivity level and choose the Invoke Alarm options to work with motion detection function. Besides the Alarm Beep, Send Email can be enabled when motion detected. The user can define the time interval to Send E-mail. Camera Setting Motion Setting Update Firmware Camera Setting Please refer to the "Web Configuration" section. 70 71 Mail Server: Mail Server IP or name. [. . . ] UTP is a form of cable used by all access methods. It consists of several pairs of wires enclosed in an unshielded sheath. Limited Warranty TRENDware warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TV-IP100W ­ 3 Years Warranty If a product does not operate as warranted above during the applicable warranty period, TRENDware shall, at its option and expense, repair the defective product or part, deliver to customer an equivalent product or part to replace the defective item, or refund to customer the purchase price paid for the defective product. All products that are replaced will become the property of TRENDware. [. . . ]