User manual TRENDNET TV-IP252P

[. . . ] PREFACE Thank you for purchasing the TV-IP252 SecurView PoE Dome Internet Camera, a standalone system that can be connected directly to an Ethernet or Fast Ethernet network. The camera features the latest Motion JPEG and MPEG-4 image technology, advanced management functionality, and GPIO connectors (e. g. connecting to the door sensors or alarm bells), allowing you to record streaming video (Motion JPEG or MPEG4 ), enable motion detection, and setup automated FTP/Email/ Network Storage service for security. The audio function (connected external microphone and audio-out device like the active speaker) of the camera allows you to deliver/receive sound to/from the camera. [. . . ] - FTP Upload With: Set the format of the image that is to be uploaded to the FTP server. You can set the - 48 - format as One Snapshot or images containing Preevent (0 ~ 3) seconds and Post-event (0 ~ 3) seconds. Event Server Setting >> Email Email - SMTP Server Address: Enter the mail server address. - Sender Email Address: Enter the email address of the user who will send the email. - Authentication Mode: Select None to disable the authentication feature, or select SMTP and then enter - 49 - the User Name and Password according to the mail server configuration. - Sender User Name: Enter the user name to login the mail server. - Sender Password: Enter the password to login the mail server. - Receiver #1 Email Address: Enter the first email address of the user who will receive the email. - Receiver #2 Email Address: Enter the second email address of the user who will receive the email. - Send Email With: Set the format of the image that is to be sent by the email. You can set the format as One Snapshot or images containing Pre-event (0 ~ 3) seconds and Post-event (0 ~ 3) seconds. Event Server Setting >> Network Storage - 50 - Network Storage - Samba Server Address: Enter the IP address of the Network Storage server. - Share: Assign the folder on the Network Storage server to share the files to users. - Path: Assign the path for uploading the files on the Network Storage server. - User Name: Enter the user name to login into the Network Storage server. - Password: Enter the password to login into the Network Storage server. - Split By: When the file is too large to upload smoothly, use this option to split it by selecting File Size or Recording Time. - When Disk Full: Select Stop Recording or Recycle ­ Delete Oldest Folder when the storage space on the Network Storage server is full. NOTE If you have enabled Recording to Storage feature, after the camera boots up completely, it will mount to the storage server. If the storage server is not available at the time, the camera will remount every 5 minutes for an hour (12 times) and then stop remounting. - 51 - 4. 7 Motion Detect The Motion Detect menu contains the command and option that allow you to enable and set up the motion detection feature of the camera. The camera provides two detecting areas. To enable the detecting area, select Window 1 or 2 from the pulldown list, and then select Enable. When the detecting area is enabled, you can use the mouse to move the detecting area and change the area coverage. [. . . ] Replacement products may be new or reconditioned. TRENDnet does not issue refunds or credit. Please contact the point-of-purchase for their return policies. TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. [. . . ]