User manual TRENDNET TV-IP262P

[. . . ] 31 How to setup/access the camera behind a Router . View and manage the tamper resistant dome IP camera from any computer with an internet connection. Manually pan the camera side-to-side350 degrees and tilt it up-and-down 70 degrees to fix its final viewing position. No need to install this camera near a power source, power and data are received through a single Ethernet cable using Power over Ethernet (PoE) technology. [. . . ] The preview image area is displayed with red dotted line. If you want to remove the preview image before uploading, click Delete. Since you click Upload, the preview image area is displayed with white dotted line. Click Enable and set the transparency setting by whether selecting the Transparent option or not. You can see the image overlay on the live view image when you click Live View. NOTE: The width and height of the input overlay graphic should be multiple of 4 at a maximum size of 43690 pixels, and in JPG or BMP (24-bit RGB) format. TV-IP262P For example, when you select the Include Date & Time and Include Text options and click Apply, you can see the related information displayed on the live view image when you click the button. Event Server The Event Server menu contains three sub-menus that allow you to upload images to FTP, send emails that include still images, and store the images to a NAS system. Privacy Mask: This item allows you to configure up to two mask areas. Select the area 1 or 2 from the Window pull-down list, and then click Enable. You can change the size and position of the area by holding and dragging the mouse. You can also change the color of the mask area by clicking the Color box and then selecting the color you want. You can see the mask area(s) on the live view image when you click Live View. Video & Audio >> Overlay / Mask >> Text Overlay This page is used to set the text overlay feature of the camera, including the following three options: date & time, heading text, and background transparency setting. Include Date & Time: Select this option to display the date & time information on the live view image. Include Text: Select this option and enter your heading text in the box to display the text information on the live view image. Enable Opaque: Select this option to display the overlay text with a background color. When you complete the required settings for HTTP Notify for Motion Trigger, FTP, Email, Network Storage, or Instant Message, click Test to test the related configuration is correct or not. Once the camera connects to the server successfully, click Apply. 23 TRENDnet User's Guide HTTP Notify For Motion Trigger Event Server Setting >> FTP TV-IP262P Send the query parameter via an HTTP notification when an event is triggered. - Host: Enter the IP of the HTTP server Port: Enter the Port number of the HTTP server User Name: Enter the username of the HTTP server Password: Enter the password of the HTTP server Query: Enter the query parameter for the request if necessary Example: Host: 192. Status=#s&time=#t&model=modelname FTP - Host Address: Enter the IP address of the target FTP server. [. . . ] 37 TRENDnet User's Guide TV-IP262P Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TV-IP262P ­ 3 Years Limited Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit's warranty continues from the original date of purchase. [. . . ]