User manual TRENDNET TV-IP410WN

[. . . ] PREFACE Thank you for purchasing the SecurView Wireless N Pan/Tilt Internet Camera, a powerful wireless network camera that provides the high quality image via the Internet connection. The camera's pan/tilt functions allow you to control the camera to monitor everywhere remotely. Through the GPIO connectors, the camera can attach a variety of external devices for your specific purposes. The camera can be installed as a standalone system within your application environment easily and quickly, and supports remote management function so that you can access and control it using a Web browser on your PC. [. . . ] The setup wizard will detect it and, if the program is not installed yet, it will ask you to install it during the process of installing SecurViewTM Pro. NOTE: Microsoft Windows Installer 3. 0 or above is a required component to install SecurView Pro. For more information of the required component during installation, please visit the Microsoft support Website. - 54 - 3. Then SecurView Pro Setup Wizard will appear. 4. Wait until the program finish the installation. By default, the destination location is C:\Program Files\TRENDnet\SecurView Pro. - 55 - 5. Click "Finish" to finish the installation. After installing the SecurView Pro, the application is automatically installed to your computer, and creates a folder in " Start \Program\TRENDnet\SecurView Pro ". - 56 - 5. 2 Using SecurViewTM Pro 5. 2. 1 Launch the Program To start SecurView Pro, double click the SecurView Pro icon on your desktop or go to Start > All Programs > TRENDnet >SecurView Pro > SecurView Pro to launch the program. On the login window, enter the User name/Password and click OK to login. The default User name/Password is admin/admin. If you wish to save the login information, please select Auto Login. - 57 - 5. 2. 2 Main Window and Features When you start and login to SecurView Pro, the Main window will display as below: The Main window provides you with the information on operating the system, as well as the control panel such as the Quick Launch buttons, and so on. NOTE For best result, it is higher recommended to configure resolution setting to 1024 x 768 or higher; otherwise, it cannot be displayed on the screen when launching the program. Live View Window displays the live video of the connected camera(s). - 58 - Quick Launch Buttons are located below the Live View Window, providing you with the following quicklaunch functions: Button Function Logout : To log out the SecurView Pro program Close: To close the SecurView Pro program Restore Recording Type: Restore all recording type to current camera's setting All Continuous Recording: Continuous recording on all cameras Stop All Recording: Stop recording on all cameras View Setting: To configure eMap settings eMap View: To view current maps Camera Status: Display cameras status Playback: Playback recorded files Schedule: Display Schedule Configuration window Event Server: Setup a SMTP server Address Book: Add/Remove email address for event notification Event Trigger: Setup event trigger configuration Device Setting : Set up the camera Recording Setting: Set up the recording path Account information: Setup administrator password Version: Display software version System Setting: Software settings - 59 - Camera View Mode buttons in this area allow you to switch the camera view mode. Buttons Functions Display the connected camera(s) in a single camera view mode. Display the connected camera(s) in a quad view mode. Display the connected camera(s) in a 3 x 3 grid view mode. Display the connected camera(s) in a 13camera view mode using a split window. The first camera is displayed as the major view. Display the connected camera(s) in a 17camera view mode using a split window. [. . . ] TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the - 107 - product was subject to conditions more severe than those specified in the manual. [. . . ]