User manual TRENDNET TV-IP422WN

[. . . ] PREFACE Thank you for purchasing the SecurView Wireless N Day/Night Pan/Tilt Internet Camera, a powerful dualcodec wireless network camera with the 2way audio function that provides the highquality image and onthespot audio via the Internet connection. The Infrared LEDs and light sensor enable the camera to capture images even in the dark environment. The camera's pan/tilt functions allow you to control the camera to monitor everywhere remotely. Through the GPIO connectors, the camera can attach a variety of external devices for your specific purposes. [. . . ] You can upgrade the firmware for your camera once you obtained a latest version of firmware. - Select the firmware: Click Browse to locate the backup file and then click Update. NOTE Make sure to keep the camera connected to the power source during the process of upgrading firmware. Otherwise, the camera might be damaged because of failure of upgrading firmware. - 54 - 4. 11 USB The USB menu provides the information and controls of the connected USB device. USB Dismount To safely remove the connected USB device, you can press the Unmount button for four seconds on the camera or click Dismount from this item. USB Information Display the Total space and Free space of the USB device. - 55 - USB Setting - When Disk Full: Select Stop Recording or Recycle ­ Delete Oldest Folder of File when the storage space on the USB device is full. NOTE The connected USB storage device can be used to store still images only and as your host system backup. It is not recommended to use the USB device as your major storage device. - 56 - 4. 12 Device Info The Information menu displays the current configuration and events log of the camera. Device Info Display the Basic, Video & Audio, Network, and Wireless settings of the camera. System Log The Logs table displays the events log recorded by the system. - 57 - CHAPTER 5 SECURVIEWTM PRO SOFTWARE This chapter describes detailed instructions on using of SecurView Pro, a customized software application with a userfriendly interface that allows you to access your cameras. The Software can monitor and record up to 36 cameras. It also let you change some basic settings of the camera, such as schedule profiles and motion detecting areas. The SecurView Pro also supports audio or Pan/Tilt function. It is recommended to use a high performance computer if you want to connect multiple cameras simultaneously. Platform: Microsoft® Windows® 7/Vista/XP Hard Disk: 80GB or above Resolution: 1024x768 or above Hardware Requirement The following provides the minimum hardware requirements: 1 ~ 8 cameras: Intel Core 2 Duo; 2GB RAM 9 ~ 32 cameras: Intel Core 2 Quad; 4GB RAM * For Windows Vista users: please go to User Accounts and Family Safety > User Accounts > Turn User Account Control on or off, then uncheck the checkbox of "Use User Account Control (UAC) to help protect your computer". Restart your computer to validate the setting. For additional information of User Account Control, please go to http://www. microsoft. com/windows/products/windowsvista/features/d etails/useraccountcontrol. mspx - 58 - 5. 1 Installation 1. Insert the Installation CDROM into your computer's CDROM drive to initiate the AutoRun program. [. . . ] TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty. There are no user serviceable parts inside the product. Do not remove or attempt to service the product by any unauthorized service center. This warranty is voided if (i) the product has been modified or repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper use (iii) the - 112 - product was subject to conditions more severe than those specified in the manual. [. . . ]