User manual TRENDNET TV-M7 QUICK INSTALLATION GUIDE

[. . . ] DHCP Server ­ wireless routers usually have a built-in An available DHCP server Application 7" Wireless Internet Camera and Photo Monitor (TV-M7) Family Monitoring (TV-IP212W) 300Mbps Wireless N Gigabit Router (TEW-639GR) Internet Home Monitoring (TV-IP110) Wireless 54Mbps 100Mbps Cable/DSL Modem Business Monitoring (TV-IP410W) 1 English 2. Connect the AC Power Adapter to the Digital Photo Frame and then to a power outlet. 2. Turn the Power Switch to the On position on top of the TV-M7. 3. Verify that the Pwr LED is green. 2 English 3. [. . . ] If the main menu does not appear, press Home on the remote control. Select your IP Camera and then press Enter. 4. Use the up and down arrows to select your IP Cameras and then press Enter. If you would like to select multiple camera(s), press the Zoom/Select button for each camera and then press Enter. Live video from your IP Camera will now appear. Remote Control Function Button HOME SETUP SNAPSHOT ESC PHOTO/MUSIC UP ARROW LEFT ARROW RIGHT ARROW Function Enter Main Menu screen Enter Setup screen Take snapshot in IP CAM view. Exit Sub Menu Play Slideshow Navigate Up Navigate Left Navigate Right 7 English Button DOWN ARROW ENTER ROTATE / REFRESH ZOOM / SELECT VOLUME UP VOLUME DOWN MUTE IP CAM PLAY/PAUSE CALENDAR REWIND STOP FAST FORWARD Function Navigate Down Execute Selection Rotate Image in Photo mode Refresh screen 5x Zoom on Image Select camera or cameras in IP Cameras menu Turn Volume Up Turn Volume Down Turn Off Audio Display IP camera(s) Play/Pause Slideshow and Video Set up time and date Rewind Video Stop Video Fast Forward Video Your installation is now complete. Note: For detailed information regarding the TV-M7 configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www. trendnet. com. Register Your Product To ensure the highest level of customer service and support, please take a moment to register your product Online at: www. trendnet. com/register Thank you for choosing TRENDnet 8 English Troubleshooting Q1: The Digital Picture Frame doesn't power on. A1: First, make sure that you connect the power adapter securely to the Digital Frame and to a working power outlet. Second, make sure to set the power switch to the On position. Please note: there is no power button on the remote control. Q2: After I successfully configured the TV-M7 to match my wireless network settings, I can not connect or view my IP cameras. A2: First, verify that you are using the following IP Cameras: TV-IP110/W, TV-IP212/W, TV-IP312/W, TV-IP410/W and TV-IP422W. Second, verify that the wireless settings on the TV-M7 match your wireless network settings. Third, make sure that you clicked Apply Settings. Fourth, if a camera is not detected, press the ROTATE/REFRESH button on the remote control to refresh the list of cameras. Fifth, make sure both the TV-M7 and your IP camera(s) have IP address in the same subnet. For example, if TV-M7 has an IP Address of 192. 168. 10. 80, then your IP camera must use 192. 168. 10. X. Sixth, make sure the HTTP port on the IP camera is set to port 80. If it is not set to port 80, please enter the configuration for your IP camera to change the HTTP port. [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Check with you Local Authority or Retailer for recycling advice. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. [. . . ]