User manual TRIANGLE LN01A

[. . . ] Apparatus should be connected to a mains socket outlet with protective earthing connection. Refer to your authorized TRIANGLE dealer or qualified service personnel if the apparatus is damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen on the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. We want you to enjoy your purchase to the fullest. The first step is an easy registration of your products. [. . . ] Powering on Once you have checked the amplifier on the active speaker is set to the “OFF” position, plug the power cord into the designated input and into an AC power outlet. The speakers are then ready for use and can be turned on. Play / Pause a track (Bluetooth mode only) 8. Reducing bass 1 3 4 6 8 10 12 SOURCE E 2 5 7 9 TREBLE TREBLE + - 11 13 BASS + BASS - When using the remote, always direct it towards the receiver on the front of the main speaker. The LED on the front panel blinks when the remote is being used. 25 EN CONNECTING SOURCES The ELARA active speakers can be paired with a variety of sources. Here are the various options : Connection via Bluetooth This enables you to stream music wirelessly thanks to latest generation 4. AptX is a coding system which enables you to stream music to your Elara speakers via Bluetooth, delivering sound approaching CD-quality. The range is of about 10 meters, depending on the surroundings and obstacles within the path. Elara active speakers lets you play music from any Bluetooth-enabled sources: smartphone, tablet, computer, etc. To do so: ÎÎ Slide the power switch on the back to the ON position to activate your Elara speakers. ÎÎ Select the “Bluetooth” input using the “INPUT” button on the back of the speaker or on the remote. The blue LED indicates that the source is connected via Bluetooth. ÎÎ Press the “Bluetooth” button on your remote. The blue LED blinks, indicating that the system is seeking to connect to a Bluetooth-enabled device (smartphone, tablet…). ÎÎ When you search on your Bluetooth device (refer to the user guide if needed), the speakers should appear under the name “LN01A” or “LN05A”, you can then connect to this. Your speakers are now linked to your device and will reproduce the sound from the device. The connection will be made automatically next time you switch on your speakers if Bluetooth is selected and enabled on your device. ÎÎ If you wish to connect another device while the previous one is still connected, disable the Bluetooth connection from your formerly paired device or disconnect it directly from the Bluetooth menu. The LED will blink again, and the seeking mode will be activated. ÎÎ Elara active’s Bluetooth process allows you to change track, play and pause directly from your remote, without using the connected device. ÎÎ Your Bluetooth device now controls your speakers and you can change the volume directly from this device. [. . . ] Adjusting the amount of bass: 6 positions available in 2dB steps over a range between 30 and 400Hz. The low-frequency output will increase or decrease each time the remote control is pressed. Adjusting the amount of treble: 6 positions available in 2dB steps over a range between 2 and 30KHz. The high-frequency output will increase or decrease each time the remote control is pressed. [. . . ]