User manual TRICITY BIW103W

[. . . ] OPERATING & INSTALLATION INSTRUCTIONS WASHING MACHINE BIW 103 W 35. 292. 794/3 Important Safety Information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance. Installation q q q q q q q q This appliance is heavy. [. . . ] Prewash Wash at 50°C 3 rinses Short spin (*) Mixed fabrics 7 rinse hold 2 kg 60 Synthetics Synthetic or mixed fabrics, underwear, coloured garments, nonshrink shirts, blouses. 8 9 10 11 12 13 14 Wash at 40°C 3 rinses Short spin (*) rinse hold 2 kg 60 Quick & Cool Lightly soiled synthetic or delicate items Wash at 30°C 3 rinses Short spin (*) Draining of water and short spin (*) Wash at 40°C 3 rinses Short spin (*) Wash at 40°C 3 rinses Short spin (*) rinse hold 2 kg 30 Short spin Separate spin for synthetics and delicates Specially tested programme for wool garments Delicate fabrics, for example curtains. 2 kg 6 Wool wash rinse hold 1 kg 50 Delicates rinse hold 2 kg 45 Delicate Rinses Separate rinse cycle for hand washed garments For emptying out the last rinse water in programmes with Rinse Hold option 3 rinses (with fabric rinse softener if required) hold Short spin (*) 2 kg 20 Drain Draining of water - 1 (*) If the rinse hold button has not been depressed. ¥Some programmes when selected may start with a short drain. This is quite normal and not a fault with the appliance. When a programme is selected, the selector dial will advance to the water filling position. ¥We recommend you not to switch the appliance off and on during its operation. This would modify the memorised programme in progress with unsatisfactory washing results. 14 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits. C0072 C0073 Cleaning the drawer recess Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse programme without any clothes in the drum. After each wash Leave the door open for a while. This helps to prevent mould and stagnant smells forming inside the appliance. Keeping the door open after a wash will also help to preserve the door seal. Maintenance Wash With the use of low temperature washes it is possible to get a build up of residues inside the drum. We recommend that a maintenance wash be performed on a regular basis. To run a maintenance wash: q The drum should be empty of laundry. q Select the hottest cotton wash programme. q Use a normal measure of detergent, must be a powder (such as Ariel Futur). P0038 Cleaning the pump The pump should be inspected regularly and particularly if ¥ the machine does not empty and/or spin ¥ the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. Proceed as follows: ¥ Disconnect the appliance. ¥ If necessary wait until the water has cooled down. ¥ Open the pump door. External cleaning Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly. Cleaning the dispenser drawer The washing powder and additive dispenser drawer should be cleaned regularly. Remove the drawer by pressing the catch downwards and by pulling it out. Flush it out under a tap, to remove any traces of accumulated powder. To aid cleaning, the top part of the additive compartment should be removed. P1114 ¥ Place a container close to the pump to collect any spillage. [. . . ] Sprung wooden floors are particularly susceptible to vibration. If possible, always place the machine on a solid floor. P0254 P0509 Special conditions If the floor is carpeted with a deep-pile carpet or covered with crumbly or soft material, insert a rigid support base under the feet to prevent noise, vibration or displacement. The base should protrude a few centimetres beyond the edges of the machine. Warning The machine should NOT be placed on deep pile carpeting. [. . . ]